The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > NFA Guns and Gear

Reply
 
Thread Tools
Old October 16, 2008, 01:45 PM   #1
ISC
Junior member
 
Join Date: August 5, 2007
Location: Florida
Posts: 1,982
10/22 Sbr

I'm thinking about building a 10/22 with short barrel.

I'm thinking 8" barrel with a reciever mounted rear sight, a butler creek folding stock, and M16/A2 flash suppressor.

I would like to keep the flexibility to change out the barrel to different lengths at will. If you are wondering why I don't just get a charger, it's because I want something that looks like a SMG with a folding stock. Kind of like a tec 22 except it works.

Does anyone have a link for a walk through description of the process with imbedded links to the applicable forms?

SBRs are OK in Fl.
ISC is offline  
Old October 16, 2008, 08:33 PM   #2
PTK
Senior Member
 
Join Date: March 20, 2008
Posts: 442
A SBR 10/22 is quite fun, especially with a silencer. Mine has a 5.5" threaded barrel, though I had to cut the Butler Creek stock back a bit for that.

As for the ownership process... http://advanced-armament.com/ownership.asp
Attached Images
File Type: jpg 10_22_1.jpg (25.2 KB, 190 views)
File Type: jpg 10_22_2.jpg (35.5 KB, 148 views)
PTK is offline  
Old October 17, 2008, 12:21 AM   #3
David Hineline
Senior Member
 
Join Date: December 23, 1999
Location: South Sioux City, Nebraska
Posts: 704
When you fill out the form 1 they will require you to specify an actual barrel length, pick the length you want and overall length you want on the form.

Then in additional description text box, put configuration will vary between 4-16" barrel and pistol style or other various stock types.

That way if you change the configuration at least something on the form will describe what you have when the PoPo is checking you out.
David Hineline is offline  
Old October 17, 2008, 06:41 AM   #4
PTK
Senior Member
 
Join Date: March 20, 2008
Posts: 442
Quote:
That way if you change the configuration at least something on the form will describe what you have when the PoPo is checking you out.
If you have the parts to return the NFA item to the description/condition noted on the F1, you're good to go. Sometimes my SBR has a full wooden stock, sometimes a folding stock, sometimes just a PG, and barrels between 3" and 12".
PTK is offline  
Old October 17, 2008, 06:46 PM   #5
Crosshair
Senior Member
 
Join Date: December 16, 2004
Location: Grand Forks, ND
Posts: 5,320
Another question. I've been thinking about a 10/22 SBR as well. There are steel versions of the 10/22 receiver available. They are expensive, around $300, but the $200 NFA tax is too.

Who here has gone with the steel receiver and who has just used the stock aluminum 10/22 receiver?
__________________
I don't carry a gun to go looking for trouble, I carry a gun in case trouble finds me.
Crosshair is offline  
Old October 17, 2008, 07:10 PM   #6
fisherman66
Senior Member
 
Join Date: August 22, 2005
Location: Rhome, TX
Posts: 4,641
Quote:
Sometimes my SBR has a full wooden stock, sometimes a folding stock, sometimes just a PG, and barrels between 3" and 12".
Is it safe to assume the the NFA stamp applies to the receiver, and not the whole rifle (thus allowing the swapping of barrels)?
__________________
la plus belle des ruses du diable est de vous persuader qu'il n'existe pas!
fisherman66 is offline  
Old October 17, 2008, 07:43 PM   #7
PTK
Senior Member
 
Join Date: March 20, 2008
Posts: 442
Crosshair

I have the factory receiver.

fisherman66

Yes, the stamp applies to the receiver. I may have this in any configuration as long as it stays semi-auto - 16" barrel and normal stock, 3" barrel, no stock, whatever. It's fun.
PTK is offline  
Old October 18, 2008, 10:40 PM   #8
Legion2600
Senior Member
 
Join Date: June 11, 2005
Location: DFW
Posts: 108
Quote:
though I had to cut the Butler Creek stock back a bit for that.
PTK....how did you cut back the stock and finish it up to still get it to look decent?
Legion2600 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:17 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07970 seconds with 8 queries