The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Reply
 
Thread Tools
Old October 16, 2008, 11:40 AM   #1
ndking1126
Senior Member
 
Join Date: January 26, 2008
Location: One house left of my neig
Posts: 1,645
m1 Garand finish

I was wondering what they used to finish the wood on the orignal M1s. I don't have one, and I am not going to refinish one, so no need for "don't destroy history" comments. Not to mention you'd be preaching to the choir because I have an old SKS I would never refinish or alter.

Thanks!
__________________
The Jeep has been a lot of fun, but time to come back to my first hobby.. shooting.
ndking1126 is offline  
Old October 16, 2008, 09:38 PM   #2
P5 Guy
Senior Member
 
Join Date: December 1, 2005
Location: Tampa Bay
Posts: 1,140
Boiled Linseed oil
P5 Guy is offline  
Old October 16, 2008, 11:10 PM   #3
lowracer
Member
 
Join Date: September 26, 2008
Location: DFW, Texas
Posts: 45
I found this site to be a great reference for treating USGI stocks. There's almost too much information here:

http://www.odcmp.com/Services/Rifles...ng_article.htm

-Mark
aka lowracer
lowracer is offline  
Old October 17, 2008, 07:00 AM   #4
gdvan01
Senior Member
 
Join Date: November 15, 2006
Location: Home of the first First Lady
Posts: 453
My stock was new wood when I received it. I rubbed it down with some '0000' steel wool and am in the process of applying some of Tom's 1/3 mix in the natural blend:

http://www.thegunstockdoctor.com/index.html
__________________
NRA Endowment Life Member

Proud Son of a former Tomb Guard
gdvan01 is offline  
Old October 17, 2008, 09:42 AM   #5
ndking1126
Senior Member
 
Join Date: January 26, 2008
Location: One house left of my neig
Posts: 1,645
lowracer, excellent website. I find it interesting though that they used BLO which is says is not waterproof... the way they talked about BLO didn't really inspire confidence in this finish for me.

Maybe I missed something, but they said that using any finish-stripping method that uses water is inappropriate. Later on, they describe how to use steam to pull out dents (which I've heard of before). Seems to me those are contradictory?

Out of curiosity, I once stripped an old shotgun with Easy-Off and water. I'm sure this isn't the best option, but I wanted to see how it worked. Seems to have worked OK for me. When I put Tru-Oil on, I described it as "on the wood" and the next stock I did I wanted the finish to be "in the wood". I was quite pleased with myself when I read this article and they used the exact same terminology I had come up with all by myself! Very informative on the Minwax, I will try that next time.. whenever that may be.

Thanks
__________________
The Jeep has been a lot of fun, but time to come back to my first hobby.. shooting.
ndking1126 is offline  
Old October 17, 2008, 09:58 AM   #6
Creature
Junior member
 
Join Date: April 8, 2007
Location: Virginia
Posts: 3,769
Quote:
I rubbed it down with some '0000' steel wool
I would recommend not using steel wool on a your stock without quickly applying a finish.

I did that once and found that very small strands of the steel wool had embedded into the stock. They were so small that they were not visible to the naked eye. I finished smoothing the stock with the steel wool and let the stock sit in my garage over a weekend, unprotected by a finish or oil.

Turns out that these tiny strands of steel wool that were embedded into the stock ended up rusting very quickly...creating very small rust spots all over the stock.

My stock looked like it had the chicken pox! I spent another whole day using Emory paper to sand the rust spots out which had penetrated deeper than I could have imagined.
Creature is offline  
Old October 17, 2008, 10:10 AM   #7
gdvan01
Senior Member
 
Join Date: November 15, 2006
Location: Home of the first First Lady
Posts: 453
Quote:
I would recommend not using steel wool on a your stock without quickly applying a finish.
Ooops...failed to mention that that the wood was not bare. It was actually already in good shape but I just wanted to give it a good smoothing down before the hand wax job.
__________________
NRA Endowment Life Member

Proud Son of a former Tomb Guard
gdvan01 is offline  
Old October 20, 2008, 08:08 AM   #8
jsmaye
Senior Member
 
Join Date: July 18, 2008
Location: Amarillo, Tx
Posts: 616
Quote:
Maybe I missed something, but they said that using any finish-stripping method that uses water is inappropriate. Later on, they describe how to use steam to pull out dents (which I've heard of before). Seems to me those are contradictory?
Differences in density and "wetness". Water will tend to soak into a porous non-protected surface. Steam won't, unless, of course, you let it cool and condense into water...
jsmaye is offline  
Old October 20, 2008, 08:54 AM   #9
nate45
Senior Member
 
Join Date: July 15, 2007
Location: Illinois
Posts: 3,746
This 03A3 and Garand, didn't look too bad when I got them, I rub down the existing finish with OOOO steel wool and then I dipped the steel wool in some walnut stain and rub it on them, then I waxed them with paste wax. Someone else had already done the 03A3, but all the cartouches are visible, on the Garand only the one on the pistol grip is visible, it looked like it had an arsenal refinish when I got it.

I need to take a better pic, this ones bad.


The Garand was made in 4/44 and the 03A3 was made in 1943, the bayonet was made by PAL in '43 as well. The 1911 is the Colt WW1 Reproduction.

I'm going to get an S&K no drill scope mount and put an old Weaver K-4 with a post rectcle on the 03A3. I know its not 'authentic', but it will be fun to shoot.


S&K no drill scope mount on an 03A3.
__________________
"No free man shall ever be debarred the use of arms."- Thomas Jefferson
ΜΟΛΩΝ ΛΑΒΕ
(>_<)
nate45 is offline  
Old October 20, 2008, 10:10 PM   #10
ndking1126
Senior Member
 
Join Date: January 26, 2008
Location: One house left of my neig
Posts: 1,645
I don't know Nate, looks pretty nice to me!
__________________
The Jeep has been a lot of fun, but time to come back to my first hobby.. shooting.
ndking1126 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:40 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08068 seconds with 7 queries