The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old October 12, 2008, 05:12 AM   #1
jssbastiat
Member
 
Join Date: March 1, 2007
Posts: 15
7mm mag bolt action has a 'catch' in it, gotta put force to get open

ok, I'm in Alaska and my 7mm rem mag was frozen up and I forced it and it jammed...

thawed it out and used the 'bolt release' pin to get the bolt to come back...oiled it down and it worked good until I shot it...now after every shot the bolt will open up, but, when I try to pull it back, it does not want to come freely...

I'm living in the bush, so, gunsmiths are hard to find...

any ideas what is wrong...can i buy a new bolt, or you think the prob is on the gun?...

any good smiths in Ak?

i'd sell it to someone that could fix it...hogue stock, 4/14 nikon scope...

jssbastiat@aol.com
jssbastiat is offline  
Old October 12, 2008, 09:36 AM   #2
Harry Bonar
Senior Member
 
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804
Bolt

Sir;
In Alaska the very last thing you want in a rifle action or chamber is oil or any TRACE of lubricant! Being baffled concerning your problem all I can think of is there may be some trace of lube somewhere or there has been some damage done.
What rifle do you have, a Remingtom, or other - you specified the caliber but not the rifle - I'm also confused about the pin you're refering to. Tell us more detail and we can wring this out.
Harry B.
Harry Bonar is offline  
Old November 17, 2008, 02:07 PM   #3
ForneyRider
Senior Member
 
Join Date: December 4, 2007
Location: Forney, TX
Posts: 723
Hunted caribou in Iliamna area of Alaska at -35 F. My 7mm Mag didn't freeze, but my dad's mdl 70 375H&H did. He wiped the oil off as well as he could, and it worked fine. His bullets dropped like a son of a gun though. Perhaps there are more loose tolerances in a Mauser.

I had my bolt body replaced for 75$ in parts and same for labor. Mine was a sporterized mauser with magnum-length action. Chances are a gunsmith will have some used parts, else the smith or an online search can return list of suppliers of commercial spare parts.

There is a guy on here WildinAlaska that does gunsmithing.
__________________
When all is said and done, there is a lot more said than done.
ForneyRider is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:45 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07896 seconds with 7 queries