The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools Search this Thread
Old December 21, 2020, 01:26 PM   #1
Davisc1293
Junior Member
 
Join Date: December 21, 2020
Posts: 6
Help Identifying German Drilling Combination Shotgun

Ive recently traded some ammo for a 16 gauge drilling combination shotgun. Admittedly I know nothing about older firearms but this peaked my interest and I wanted to get rid of some ammo before the value of it comes back down. Its a 16 gauge SxS with some kind of rifle cartridge in the bottom barrel. Im not really interested in selling but I am curious of the value to see how I did with the trade, and I am also looking for any and all information anybody can extend my way about the shotgun. Particularly the caliber of the lower barrel, estimated time of production, is it capable of firing modern 16ga? and anything else anyone can tell me about it would be greatly appreciated.
Attached Images
File Type: jpg drill.jpg (270.2 KB, 102 views)
File Type: jpg 2.jpg (210.4 KB, 93 views)
File Type: jpg 3.jpg (253.3 KB, 96 views)

Last edited by Davisc1293; December 21, 2020 at 01:57 PM.
Davisc1293 is offline  
Old December 21, 2020, 01:53 PM   #2
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 18,453
The Germans have been making drillings for well over 100 years.
If you want a discussion you are going to have to show multiple close clear pictures.
Especially of the proof marks on the bottoms of the barrels and the action flats and the maker's name which may be on the barrel or the top rib.

An older European 16 gauge shotgun will be chambered for the 65mm (2 1/2" or 2 9/16") shell. RST makes them, catching them in stock may be a challenge these days.
http://www.rstshells.com

The rifle barrel on a drilling can be difficult to identify, it may require measurement of a chamber cast if the proof marks are not enough description. And there were a lot of choices, many difficult to buy or even to handload.
Jim Watson is offline  
Old December 21, 2020, 02:00 PM   #3
Davisc1293
Junior Member
 
Join Date: December 21, 2020
Posts: 6
Here are some photos Of the markings i can see
Attached Images
File Type: jpg A.jpg (173.8 KB, 83 views)
File Type: jpg B.jpg (174.1 KB, 78 views)
File Type: jpg c.jpg (137.8 KB, 69 views)
Davisc1293 is offline  
Old December 21, 2020, 02:12 PM   #4
Davisc1293
Junior Member
 
Join Date: December 21, 2020
Posts: 6
The barrel is marked Chr. Hoffacker
Davisc1293 is offline  
Old December 21, 2020, 02:16 PM   #5
Davisc1293
Junior Member
 
Join Date: December 21, 2020
Posts: 6
More marking
Attached Images
File Type: jpg 12.jpg (229.5 KB, 73 views)
Davisc1293 is offline  
Old December 21, 2020, 02:57 PM   #6
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 18,453
I can tell
Gunmaker Christopher Hoffacker in Munich, Germany.
Shot barrels (S) were proof tested(U) as required by law ever since 1891, surely before 1939, likely before 1912. The right barrel at least is choked (W). It is about .655" diameter (17/1), a rather "tight" 16 gauge. Chambers are 65mm (2 9/16" for 2 1/2" shells), 70mm would be marked.
http://www.germanhuntingguns.com/abo...dentification/

Rifle barrel is marked 118.35 which is the gauge measurement of the bore of 8.64mm. Now this was done quickly with a plug gauge and does not correspond to an exact measurement and says nothing about the chamber.
But there were common rounds and a hammer drilling was very often 9.3x72R. This is an old medium game rifle similar in power to US .38-55, not to be confused with the later and much more powerful 9.3x74R.
I found a post that some of these run small and are really 9x72R.
https://www.doublegunshop.com/forums...&Number=141675

You really need a chamber cast and bore slug measurement before buying ammo, it isn't cheap.
https://www.buffaloarms.com/9-3x72r-...of-20-amo9372r
https://www.grafs.com/retail/catalog...tegoryId/4195?
Jim Watson is offline  
Old December 21, 2020, 03:13 PM   #7
Davisc1293
Junior Member
 
Join Date: December 21, 2020
Posts: 6
Thank You!

Thank you so much for the information and knowledge you were able to provide, that's a huge help. Im sure value like everything else depends on the buyer and condition but do you have a rough idea of its value in todays market?
Davisc1293 is offline  
Old December 21, 2020, 03:27 PM   #8
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 18,453
I can't guess a dollar value. ASKING price for a 16x16x9.3 hammer drilling on Gunbroker is $2000 or more but NO bids. There is one currently at $505 but with a long time to run.
Jim Watson is offline  
Old December 23, 2020, 12:49 PM   #9
DT Guy
Senior Member
 
Join Date: February 4, 2001
Posts: 954
I can't add any info except that that is a gorgeous piece of gun-art.

Larry
__________________
He who fights and runs away had better run pretty damn fast.

Government, Anarchy and Chaos
DT Guy is offline  
Old December 23, 2020, 04:46 PM   #10
Davisc1293
Junior Member
 
Join Date: December 21, 2020
Posts: 6
I appreciate all the info and input I can get. Thank you for the information! It is a very interesting piece that will most likely end up hanging on the wall with my trap doors and sterlingworth. Considering I only traded 400 rounds of match grade .308 that I've had for a few years after selling my only .308 rifle... Ild say Im happy with the trade.
Davisc1293 is offline  
Old January 11, 2021, 08:01 PM   #11
mapsjanhere
Senior Member
 
Join Date: August 6, 2009
Location: Albuquerque
Posts: 2,832
8.64 is way to narrow for a 9.3 mm bullet, typically the lands are .1- .2 mm deep. My guess would be a 9 mm bullet, nearly all German cartridges at the time came with a rimmed version for break-action guns, 9x57R would be my first guess.
__________________
I used to love being able to hit hard at 1000 yards. As I get older I find hitting a mini ram at 200 yards with the 22 oddly more satisfying.
mapsjanhere is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.07186 seconds with 10 queries