The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old September 8, 2008, 07:13 PM   #1
Glenner
Senior Member
 
Join Date: April 4, 2008
Location: Indiana
Posts: 127
Can't put it back together - DARN IT!

I've got a Hopkins $ Allen, Safety Police that I took apart and can't get together. Can someone instruct me on how to get it back together?

If there's a Gunsmith in the Elkhart Indiana area that can do the work, I'd be glad to pay for the service.

I appreciate any help.
THANKS!!!!!!!!!!!!
Glenner is offline  
Old September 8, 2008, 08:39 PM   #2
TEDDY
Junior member
 
Join Date: December 10, 2006
Location: MANNING SC
Posts: 837
???

thats an old one.ivers and h&r are a pain.as you have to jocky the parts in.I have a new model H & R and as I grew up on them I can do it but cant describe it.thats where some of the illistrated books come in handy.
TEDDY is offline  
Old September 8, 2008, 10:28 PM   #3
hockeysew
Member
 
Join Date: August 21, 2008
Posts: 91
Try doing a search for an exploded drawing online. Short of taking it to a 'Smith that is going to be your best bet.
You can check E-Gunparts.com
They may have a schematic you can download. It might cost you 3 or 4 bucks but what is your sanity worth?
hockeysew is offline  
Old September 12, 2008, 06:49 PM   #4
bcarver
Senior Member
 
Join Date: February 22, 2007
Location: Jackson,Mississippi
Posts: 836
don't feel bad

I have taken several guns to the shop in boxes.
One gun I own has to be turned upside down to be reassembled.
bcarver is offline  
Old September 13, 2008, 09:40 PM   #5
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,647
I am not familiar with that particular model, but one "trick" in assembling many of those old revolvers is the use of a "slave pin." (I have been told that the term "server pin" is more politically correct, but I have never been much on PC.)

Anyway, the slave pin is a short pin that is a slip fit in an internal part, like the trigger guard, which will hold in another part, like the single action sear. The sear and spring are assembled into the rear of the trigger guard and the slave pin used to hold them in. Since the slave pin is the same length as the width of the guard, the guard can be inserted into the frame, then when the normal pin is installed, it pushes out the slave pin.

HTH

Jim
__________________
Jim K
James K is offline  
Old September 14, 2008, 07:14 AM   #6
Glenner
Senior Member
 
Join Date: April 4, 2008
Location: Indiana
Posts: 127
Thanks for the help guys!
I gave up and put it in the hands of a local Gunsmith...............
Glenner is offline  
Old September 17, 2008, 06:42 PM   #7
zippy13
Senior Member
 
Join Date: August 23, 2008
Location: SoCal
Posts: 6,411
Coaxial Assembly Assistant

Quote:
Originally Posted by Jim Keenan
(I have been told that the term "server pin" is more politically correct, but I have never been much on PC.)
OMG!
Next the "servers" of the world will feel slighted. To avoid offending anyone, I'll just name it based on its origin. How about "lolly pop pin" -- is that PC enough?
zippy13 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07045 seconds with 7 queries