The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools
Old August 21, 2008, 02:01 PM   #1
Bob-EastTN
Junior Member
 
Join Date: August 11, 2008
Location: Mountains of NE TN Mountain City
Posts: 2
Weatherby Mark II Italian Disassembly Inst.

I have a Mark XXII that has never been so called field stripped, if that is indeed possible by the average guy. The bore has been cleaned but only wiped for the receiver and trigger mechanisms. I know how to field strip an M1 Garand and an M1 Carbine. Misplaced the instructions many years ago, if there ever were any. It is fast approaching squirrel season in Tenn. and I am itching for some squirrel gravy.

Bob-EastTN
millerr@k12tn.net

Last edited by Bob-EastTN; August 21, 2008 at 09:10 PM. Reason: update model designation
Bob-EastTN is offline  
Old August 22, 2008, 02:41 AM   #2
Steven Mace
Senior Member
 
Join Date: November 15, 1999
Location: Clifton, Colorado USA
Posts: 724
Bob, try the follow steps:

1. Remove the action from the stock.

2. Push out the cross pin.

3. Push the trigger group about 1/4 of an inch to the rear and then down to remove it. It may need a little tap with a mallet.

4. The bolt handle is held into the bolt with a ball detent. Pull out on the bolt handle and it will come out of the bolt.

5. Pull the bolt a little to the rear and lift the front of the bolt out of the receiver while controling the recoil spring.

Hope this helps!

Steve Mace
__________________
After today, its all historical
Steven Mace is offline  
Old August 22, 2008, 02:08 PM   #3
Bob-EastTN
Junior Member
 
Join Date: August 11, 2008
Location: Mountains of NE TN Mountain City
Posts: 2
Many Thanks! and a tip of the Hat!

Steve,

I got as far as the spring loaded cross pin, but I suppose after twenty odd years of goop on the assembly it would be stuck. I think the mallet is in order. I shall dedicate the first batch of East Tenn. squirrel gravey to you.

Bob Miller
millerr@k12tn.net
Bob-EastTN is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:59 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06948 seconds with 7 queries