The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old August 16, 2008, 07:15 AM   #26
impactco
Senior Member
 
Join Date: January 12, 2008
Posts: 102
The CCIs work fine in my RCBS RC press and RCBS bench priming tool. It would appear that the LNL AP is just finicky about primers. Maybe if I paint the press blue or green, it will change it's attitude.
impactco is offline  
Old August 16, 2008, 11:31 AM   #27
lll Otto lll
Senior Member
 
Join Date: June 1, 2008
Location: Lone Star State
Posts: 166
It would be interesting to see if you have the same problem with Winchester or Remington primers. And you haven't checked the large primer seating yet, right?
lll Otto lll is offline  
Old August 16, 2008, 03:07 PM   #28
DEDON45
Senior Member
 
Join Date: March 24, 2008
Posts: 278
That little mark / dent under the primer punch on the frame is normal; mine seats Winchester, Magtech, and CCI Magnum LP primers fine... I have heard of various lots of CCI primers having dimensional differences sometimes... by all means, try some other primers.
DEDON45 is offline  
Old September 1, 2008, 02:20 PM   #29
pinoykillaz
Junior Member
 
Join Date: August 23, 2008
Posts: 1
impactco you got me scared hehe im reading all review pf this hornady machine coz im about to buy one..im glad it was positive feed at the end...ill go ahead and buy ap today..thnx again guys
pinoykillaz is offline  
Old September 1, 2008, 04:57 PM   #30
impactco
Senior Member
 
Join Date: January 12, 2008
Posts: 102
It does work adequately with Winchester and Remington primers. They don't seat as deeply as they do with my RCBS bench priming tool but they are good enough.
impactco is offline  
Old September 1, 2008, 06:38 PM   #31
wpcexpert
Senior Member
 
Join Date: February 28, 2008
Location: Central Arkansas
Posts: 791
impactco...

You serious about selling the primers? CCI is about all I use. I'm running the LNL also.
__________________
When once a republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.
- Thomas Jefferson
wpcexpert is offline  
Old September 1, 2008, 07:02 PM   #32
zxcvbob
Senior Member
 
Join Date: December 20, 2007
Location: S.E. Minnesota
Posts: 4,126
I have to really lean on the handle to seat Remington 1.5 primers in anything except RP brass. And they just flat out won't seat in S&B brass. Unfortunately, I bought a boatload of Rem 1.5's a year ago. Glad I figured out I can use them in RP brass.

No problem with Remington large pistol primers, or any other brand of small primers unless the shell plate gets loose.

BTW, do y'all switch out the primer seater when changing from small to large primers, or just leave the small punch installed and use it for both?
__________________
"The only way to stop a bad guy with a gun is with a good guy with a gun"
zxcvbob is offline  
Old September 2, 2008, 05:32 PM   #33
Humdinger
Junior Member
 
Join Date: February 6, 2006
Location: North Carolina
Posts: 10
This ought to make you feel better

I read your original post and can tell you that I had the same experience with the same .223 LC brass and CCI primers. I am using a Lee Classic Turret Press and can tell you for sure that I have the exact same problem. That combination of brass and primer is the problem, not your press. Try some different .223 brass other than military, and the problem should be nonexistent.
Humdinger is offline  
Old September 2, 2008, 06:00 PM   #34
impactco
Senior Member
 
Join Date: January 12, 2008
Posts: 102
Thanks for the tip. I'll give that a try.
impactco is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10033 seconds with 7 queries