Trigger stop for Smith m67-1

Playboypenguin · July 29, 2008, 06:18 PM

I just picked up my Smith m67-1. It is is like new except for he fact that the original owner removed the trigger stop (or whatever it is called) and lost it. It is the piece that sits behind the trigger in a slot in the body of the gun and stops the trigger from traveling too far.

Does anyone know what the part is actually called? Where I can get one? How hard it is to install?

Here is the gun and the slot where the piece goes.

LHB1 · July 29, 2008, 09:58 PM

Phone call to S&W? You might get lucky and they just send you the part if it doesn't require gunsmith fitting.

Playboypenguin · July 29, 2008, 10:49 PM

I added pics to the OP to show the gun and where the piece goes.

LHB1 · July 30, 2008, 12:53 AM

Are you sure a trigger stop goes in that slot? Not sure I remember seeing a S&W revolver with a trigger stop other than a screw drilled and tapped in the trigger like a 1911.

Playboypenguin · July 30, 2008, 12:56 AM

That is what the pic on the diagram showed. In the picture of the exploded view, there is a little tab in the slot.

LHB1 · July 30, 2008, 01:00 AM

OK, guess we are back to contacting S&W or checking Brownell's catalog of gun parts to see if they have it listed. Hope you can find one.

July 29, 2008, 06:18 PM	#1
Playboypenguin Junior member Join Date: February 27, 2006 Location: Great Pacific Northwest Posts: 11,515	Trigger stop for Smith m67-1 I just picked up my Smith m67-1. It is is like new except for he fact that the original owner removed the trigger stop (or whatever it is called) and lost it. It is the piece that sits behind the trigger in a slot in the body of the gun and stops the trigger from traveling too far. Does anyone know what the part is actually called? Where I can get one? How hard it is to install? Here is the gun and the slot where the piece goes. Last edited by Playboypenguin; July 29, 2008 at 10:49 PM.

July 29, 2008, 09:58 PM	#2
LHB1 Senior Member Join Date: March 25, 2005 Location: Houston, TX Posts: 1,545	Phone call to S&W? You might get lucky and they just send you the part if it doesn't require gunsmith fitting. __________________ Good shooting and be safe. LB

July 30, 2008, 12:53 AM	#4
LHB1 Senior Member Join Date: March 25, 2005 Location: Houston, TX Posts: 1,545	Are you sure a trigger stop goes in that slot? Not sure I remember seeing a S&W revolver with a trigger stop other than a screw drilled and tapped in the trigger like a 1911. __________________ Good shooting and be safe. LB

July 30, 2008, 01:00 AM	#6
LHB1 Senior Member Join Date: March 25, 2005 Location: Houston, TX Posts: 1,545	OK, guess we are back to contacting S&W or checking Brownell's catalog of gun parts to see if they have it listed. Hope you can find one. __________________ Good shooting and be safe. LB

July 29, 2008, 10:49 PM	#3
Playboypenguin Junior member Join Date: February 27, 2006 Location: Great Pacific Northwest Posts: 11,515	I added pics to the OP to show the gun and where the piece goes.

July 30, 2008, 12:56 AM	#5
Playboypenguin Junior member Join Date: February 27, 2006 Location: Great Pacific Northwest Posts: 11,515	That is what the pic on the diagram showed. In the picture of the exploded view, there is a little tab in the slot.