The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old July 26, 2008, 05:05 PM   #1
ikesdad
Member
 
Join Date: April 2, 2007
Posts: 21
Winchester barrel on SR Mauser

I've been trying to find out if a Winchester 70 barrel can be rethreaded for a small ring Mauser. The Winchester threads are 1" dia and the sr Mauser threads are .980 dia. Is there enough minor diameter on the Winchester shank to do this?
ikesdad is offline  
Old July 27, 2008, 10:45 AM   #2
norsecat
Junior Member
 
Join Date: March 4, 2008
Posts: 12
Winchester barrel on SR Mauser

Yes you can do just what your thinking.
Many Mauser's have thread diameter that is smaller then documented.
Also thy have a 55d degree thread not 60 There is tap from Midwayusa to fix and clean up the receiver threads.

So any Winchester or Remington barrel can be converted to Small ring Mauser.
norsecat is offline  
Old July 27, 2008, 01:56 PM   #3
Harry Bonar
Senior Member
 
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804
SR bbl.

Sir;
The thread size of the small ring Mausers is .980X12 at 55 degree (most smiths thread 60 degree).
As long as your shank can be turned to .980 you're home free.
But - generally the small ring actions are limited to cartridges of 45,000 cup. You need to inspect your action, cracks, lug seath, etc. before re-barreling!
I personall think that alot of SR actions will take more than that, yet, I wouldn't suggest it.
Harry B.
Harry Bonar is offline  
Old July 27, 2008, 04:53 PM   #4
ikesdad
Member
 
Join Date: April 2, 2007
Posts: 21
Its for a Mex Mauser. I only need to know if the minor diameter of the Winchester shank is at least .980.
ikesdad is offline  
Old July 27, 2008, 07:03 PM   #5
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,405
Your minor diameter on the Winchester barrel is too small, but you can cut the threads off and rethread the barrel quite easily.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old July 28, 2008, 10:25 AM   #6
Clemson
Senior Member
 
Join Date: March 9, 2001
Location: Greenwood, SC
Posts: 820
The Mexican Mauser actions are nice enough to rate a brand new barrel rather than a factory takeoff. A Shilen or Douglas barrel would almost undoubtedly be a more accurate tube.

Just my $0.02..........

Clemson
__________________
NRA Endowment Member, NRA Certified Instructor
CWP Holder
US Army veteran
Gunsmith www.boltandbarrel.com
Clemson is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:48 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06755 seconds with 9 queries