The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old July 19, 2008, 04:13 PM   #1
RSKENT
Junior Member
 
Join Date: November 25, 2004
Posts: 2
bore scope ?

Has anyone here ever seen a home made bore scope?
I would like to be able to see the chamber and lead
on my AR barrel. I know I could just take off the barrel,
put it up next to my eye and look, but I would like to not
have to go to all that work.
Any thoughts?
RSKENT is offline  
Old July 19, 2008, 08:22 PM   #2
Harry Bonar
Senior Member
 
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804
bore scope

Sir;
Never saw a homemade one but Doc brought one up two years ago and we used it.
Now, a word of advice - if you have a "favorite gun don't look at the barrel and chamber with a bore-scope. That thing will show EVERY imperfection and simply scare you to death.
They are a nice tool for pitted spots etc., but really show what a bore looks like.


Harry B.
Harry Bonar is offline  
Old July 20, 2008, 11:19 AM   #3
Peter M. Eick
Senior Member
 
Join Date: August 3, 1999
Location: Houston, Texas
Posts: 2,877
Harry,

I have wondered about buying one for the "fun of it". I see this as a choice between another gun and a toy. They both cost about the same, but the bore scope would be useful for cleaning and the like.

If you were not a smith and just an interested shooter, do you see much value in them?

Any advice or general comments?

Thanks!
__________________
10mm and 357sig, the best things to come along since the 38 super!
Peter M. Eick is offline  
Old July 20, 2008, 11:45 AM   #4
Harry Bonar
Senior Member
 
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804
bore scope

Peter;
I think I'd buy another gun! The scope is a fine tool to have and would really show what the inside of your favorite piece looks like but the striations of buttoning or "cut rifling" to me are of no consequence - you don't even need a "straight" barrel to shoot well.
We had a Sako AII in 22-250 and at 200 yards would shoot dime size groups at that distance (as hard as that is to believe) but I sold it and we rebarreled it to 308. The old Sako bbl? It ran out in the lathe at least .035 O.D. and looked like a snake wiggling when looking through it turning! Yet it really shot!
Buy a surplus military rifle (Mauser 98 - VZ24) and try your hand at sporterizing it. I like Mr. Kunhausens book on them. Good shooting.
Harry B.

Last edited by Harry Bonar; July 20, 2008 at 11:46 AM. Reason: spelling
Harry Bonar is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06691 seconds with 7 queries