The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools
Old June 9, 2008, 03:08 PM   #1
hivel37
Senior Member
 
Join Date: August 24, 2004
Location: Hill Country
Posts: 521
Remington pocket pistol

This piece belongs to a friend of mine. I am estimating the condition at 10%. All parts are operational, and it's not in firing condition. It was found in a field many years ago. Any comments on it's condition and value would be appreciated.

http://i302.photobucket.com/albums/n...7/P1010116.jpg
http://i302.photobucket.com/albums/n...7/P1010118.jpg
hivel37 is offline  
Old June 9, 2008, 04:09 PM   #2
Tom2
Senior Member
 
Join Date: June 23, 2004
Location: Ohio
Posts: 5,648
I can't tell, does it have some sort of a adapter plate on the rear of the cylinder for firing cartridges? It is collectable for sure in the condition that it is now in. I cannot tell you a value but probably hundreds of dollars, even. That value is probably sort of subjective especially in the lower condition ranges. I have a replica of the cap and ball version of that gun, with brass frame. Payed 150$ for it. It would be interesting to get one if you wanted to see how they were to shoot. IF it was for sale, rather than a dealer, maybe one of the gun online auctions would be best. A dealer will pay you a low price so he can mark it up alot. At least with an auction with wide exposure, you will probably get much closer to a market retail value for it. And being a nonfunctional antique, none of the hassles of selling a modern gun like ffl's and paperwork etc.
__________________
Your gun is like your nose, it is just wrong for someone else to pick it for you!
Tom2 is offline  
Old June 9, 2008, 04:19 PM   #3
Steven Mace
Senior Member
 
Join Date: November 15, 1999
Location: Clifton, Colorado USA
Posts: 724
hivel37, from your pictures it appears as if you have a Remington New Model Pocket Revolver which were made from about 1865-1873 with about 25,000 produced. It's hard to tell from your picture but is the frame brass or steel?

Steve Mace
__________________
After today, its all historical
Steven Mace is offline  
Old June 9, 2008, 10:50 PM   #4
hivel37
Senior Member
 
Join Date: August 24, 2004
Location: Hill Country
Posts: 521
The reference that I have is Fjestad's 29th edition. By reading that, the only difference between the New Model Police Revolver being .36 caliber and the New Model Pocket Model being .31 caliber. I couldn't get a reliable measurement at the bore, because of corrosion. It just occurred that I could get a measurement at the cylinder. A "duh" moment.

The plate on the back of the cylinder is loose. I am not familiar with percussion revolvers, so am not sure if it is a converted model.

The frame is steel.

Last edited by hivel37; June 9, 2008 at 10:51 PM. Reason: additional information.
hivel37 is offline  
Old June 9, 2008, 11:13 PM   #5
Steven Mace
Senior Member
 
Join Date: November 15, 1999
Location: Clifton, Colorado USA
Posts: 724


Remington New Model Police Revolver

hivel37, the difference between your revolver and the one pictured above, other than caliber, would be the type of trigger. Yours has a spur trigger which was used on the Remington New Model Pocket Revolver and not the Police Revolver. Yours also appears to have been converted to metallic cartridges instead of percussion caps. I would guess the value at around $600-$700. Hope this helps!

Steve Mace
__________________
After today, its all historical
Steven Mace is offline  
Old June 10, 2008, 07:16 AM   #6
hivel37
Senior Member
 
Join Date: August 24, 2004
Location: Hill Country
Posts: 521
Thank all of you for your replies. This helps alot in my attempt to rate the condition and value of the revolver.
hivel37 is offline  
Old June 10, 2008, 02:50 PM   #7
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,440
It is the New Model Pocket revolver "conversion." The New Model Police is an entirely different and larger gun and has a trigger guard. The original Pocket Model was a percussion revolver of .31 caliber; the conversion took .32 rimfire.

After rimfire cartridges came into general use, Remington offered the revolver in .32 rimfire with a removable rear cylinder plate (so as not to infringe the Rollin White patent). Those guns were made that way at the factory; they are often called "conversions" but whether the cylinders used were actually percussion cylinders or were new made is in question.

In any case, the gun in the picture appears to be factory made, not a conversion by a gunsmith. The rear plate is normally a bit loose as it is removed for loading.

Loading entails removing the cylinder, then removing the rear plate, loading cartridges into the cylinder, then replacing the rear plate and putting the cylinder back in the gun.

Jim
__________________
Jim K
James K is online now  
Old June 10, 2008, 03:28 PM   #8
Tom2
Senior Member
 
Join Date: June 23, 2004
Location: Ohio
Posts: 5,648
Here is the Italian brass frame replica of the Remington as compared to a typical 19th century 32 rimfire pistol of economical grade. A box of Navy Arms 32 rimfire. I think they were made in shorts and longs, possibly. The replica is a Pietta and Cabelas had carried them, among others. I don't know if anyone is making a conversion cylinder for 32's like they do the bigger Remingtons. But the replica would let you get the feel of shooting at least the cap and ball version of the thing. Probably pretty fun little pop gun in that caliber.
Attached Images
File Type: jpg Remington.jpg (92.5 KB, 292 views)
__________________
Your gun is like your nose, it is just wrong for someone else to pick it for you!
Tom2 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07322 seconds with 8 queries