The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old May 4, 2008, 05:54 PM   #1
SwingOut
Junior Member
 
Join Date: May 2, 2008
Posts: 12
S&W 686 Grips (backstrap)

Hey Folks,

I have an older '87 maybe, S&W 686, came with the goncalo alves wood grips. When I bought it the guy also sold it to me with a pair of rubber grips. I assume this has been addressed before, but grips change alot and so do people's opinions about what might be good for a situation.
I don't have the biggest hands, and I find the reach on the 686 comfortable. But the rubber grips I have don't cover the backstrap of the gun, and that is where I "feel" regular full house factory loads.
I was wondering if anyone with smaller to medium hands (the grip on an XD40 is about perfect for me (width wise, and reach to trigger), would be killer if they had a slight rubber coating on the checkered part of the grips, but for reference) that knows of some rubber grips I can put on the 686 that covers the backstrap w/o making them too fat or giving them too much of a reach for the trigger.
I don't mind a slight grip contour for the fingers, but I am not huge into big, contoured finger areas on grips.
I know there are lots of grips out there, but my local shops don't carry alot in stock, so maybe someone has some ideas. I am not crazy about the looks of the hogue(sp?) grips they put on current 686's, but maybe that is what I need?

matt
SwingOut is offline  
Old May 5, 2008, 10:28 AM   #2
bikerbill
Senior Member
 
Join Date: September 19, 2007
Location: Lago Vista TX
Posts: 2,363
I have a 686+ 4-incher that is probably my favorite gun. I hated the stock grips from the minute I picked up the gun, and started looking for a replacement. I saw a set in another thread from a company called Trausch

www.trausch.com

the site is a little hard to navigate, but the grips are inexpensive -- $32!!! -- and amazingly good. They feature a lip right at the top of the backstrap which helps keep the muzzle down when firing full-house loads, they're made of a nice soft rubber which covers the backstrap and makes it a pleasure to shoot even the hottest loads. I have small hands and they fit me perfectly.

The TJ93 is the right grip.

Good luck.
__________________
"If all guns were built with mechanisms that kept them from firing when held sideways, we could end gang violence." humorist Frank Fleming
bikerbill is offline  
Old May 5, 2008, 08:46 PM   #3
SwingOut
Junior Member
 
Join Date: May 2, 2008
Posts: 12
I will check them out.

Thanks.

matt
6" 686
SwingOut is offline  
Old May 5, 2008, 10:07 PM   #4
lev83
Senior Member
 
Join Date: August 2, 2005
Posts: 130
The only grip I am aware of for the 686 that covers the backstrap of the gun are the Pachmyars. There are several versions available but I caution you that these seem to work best for bigger hands.
lev83 is offline  
Old May 8, 2008, 10:52 AM   #5
MK11
Senior Member
 
Join Date: April 26, 2001
Posts: 574
I agree on the Pachmayrs. I put a pair of Compacs on my Model 19 that cover the backstrap. The difference in length is surprisingly noticeable but totally worth it for me. I can shoot anything out of it now in comfort while before even hot .38s were annoying.
MK11 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06086 seconds with 7 queries