The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old April 2, 2008, 08:58 AM   #1
Jack Reevez
Member
 
Join Date: April 2, 2008
Posts: 32
anyone using Clenzoil Field & Range to clean?

I was just wondering if anyone has used Clenzoil Field & Range Solution to clean handguns/shotguns?

Does it remove Lead and Copper at all?

Also if its a good lubricant?

thanks.
Jack Reevez is offline  
Old April 2, 2008, 09:30 PM   #2
itman
Senior Member
 
Join Date: April 30, 2005
Posts: 199
I will never use anything else. It's good for every day use or for long storage. I will not use anything else.
itman is offline  
Old April 3, 2008, 12:02 AM   #3
Jack Reevez
Member
 
Join Date: April 2, 2008
Posts: 32
Itman

Sir, you use it to clean your handguns or shotguns? I am looking to use sumthing to do both, Clean and Lubricate my handguns.
Also do u think it cleans out copper and lead?

Thanks

Last edited by Jack Reevez; April 3, 2008 at 07:12 AM.
Jack Reevez is offline  
Old April 3, 2008, 06:58 PM   #4
itman
Senior Member
 
Join Date: April 30, 2005
Posts: 199
Well I use the stuff on everything. Handguns, rifles, shotguns, hand tools, anything. Now I only use if for lubricant. For solvent I use hoppers(sp?) 9.
itman is offline  
Old April 3, 2008, 07:24 PM   #5
Shane Tuttle
Staff
 
Join Date: November 28, 2005
Location: Blue Grass, IA
Posts: 8,566
Used it for some time....HATED it. I hate it more than RemOil. It doesn't work for me.

Eezox is what I use on everything. Tetra Grease on the slides as needed. Very small amount of both...
__________________
If it were up to me, the word "got" would be deleted from the English language.

Posting and YOU: http://www.albinoblacksheep.com/flash/posting
Shane Tuttle is offline  
Old April 3, 2008, 07:47 PM   #6
ssilicon
Senior Member
 
Join Date: May 5, 2005
Posts: 459
Quote:
Eezox is what I use on everything. Tetra Grease on the slides as needed. Very small amount of both...
Heard good things about Eezox. I tried Break Free CLP and find it seems to do a pretty good job too. Prior to trying the BFCLP, I used Outers/Gunslick solvent and oil which I always thought did a fine job. I've used Hoppes solvent too.
ssilicon is offline  
Old April 4, 2008, 10:34 PM   #7
Shane Tuttle
Staff
 
Join Date: November 28, 2005
Location: Blue Grass, IA
Posts: 8,566
Quote:
Heard good things about Eezox. I tried Break Free CLP and find it seems to do a pretty good job too. Prior to trying the BFCLP, I used Outers/Gunslick solvent and oil which I always thought did a fine job. I've used Hoppes solvent too.
It's been my favorite so far. Breakfree CLP isn't bad stuff. It's just waaay to messy for my taste. I do use Hoppes No.9 for bore cleaning, but everything else is what I stated.

I think there are MANY good cleaners/lubes/penetrants out there. WeaponShield comes to mind as well as Breakfree. Eezox has the characteristics that I like best for me...
__________________
If it were up to me, the word "got" would be deleted from the English language.

Posting and YOU: http://www.albinoblacksheep.com/flash/posting
Shane Tuttle is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:31 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06830 seconds with 7 queries