The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old March 19, 2008, 08:27 AM   #1
Crestliner
Member
 
Join Date: March 6, 2008
Location: Western MA
Posts: 79
Speed Loaders or Strips

I like the concept of the strips vs. round loaders because of the ease of concealment. However, I'm not sure if it's pure folly to consider the strips, as your reload time sould be dramatically increased. This will be for a new SP101 .357 which I'll be picking up this week. From what my other shooting companions are saying, it appears the SP is not conducive to the round drop-in speed loaders; due to the short ejection rod and grip interferance. Thoughts? Opinions? Thanks folks!
__________________
"A voyage in search of knowledge need never abandon the spirit of adventure"
Crestliner is offline  
Old March 19, 2008, 08:55 AM   #2
Sarge
Senior Member
 
Join Date: May 12, 2002
Location: MO
Posts: 4,887
The short SP101 actually has about as much ejector rod travel as some bigger guns, due to the fact that the front of the rod doesn't serve as a latch; so the rod can be longer in the same-sized shroud. That said, it will not 'clear' magnum cases- again, like many larger guns. You overcome this by tilting the barrel skyward upon reloading and striking the ejector rod smartly. It will clear them then.

I carry a SP101 and have settled on the Safariland-style speedloaders w/o the knob, which release the cartridges when pressed into the cylinder. They seem to clear the stock grips a little better than HKS does- and I have both. Don't be afraid to remove a little grip material if that's what it takes to facilitate trouble-free reloads under pressure.

There is absolutely nothing wrong with Speed Strips either, and they do in fact carry better in a jacket pocket. Be advised that they are soft rubber however and they will hang on material if you aren't careful.
__________________
Visit us at The Sixgun Journal or the archive, at http://sargesrollcall.blogspot.com/
Sarge is offline  
Old March 19, 2008, 09:14 AM   #3
KMO
Senior Member
 
Join Date: January 13, 2008
Location: Northern Arizona
Posts: 938
"Speedless" Strips

I agree with both of you regarding the strips being good for carry & concealment. But, that's about as far as they go. The two-at-a-time method they recommend for using the strips just doesn't deserve the word, "speed," attached to it. Try one this way...Just grab your rounds in one hand and tear away the strip. You can load 4 or 5 with your hand into the cylinder fasting than the 2-at-a-time method. It's almost a "speed" strip this way...
KMO is offline  
Old March 19, 2008, 03:37 PM   #4
chris in va
Senior Member
 
Join Date: December 26, 2004
Location: Louisville KY
Posts: 12,491
I have the Hogue monogrip on my SP. The inside shell won't eject without me rotating the cylinder due to the grip. Same goes for the speedloader, it gets in the way.

When I find some strips locally, I'll be picking them up. I can keep 3 of those suckers in my pockets without the bulge.
chris in va is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:46 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08370 seconds with 7 queries