The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old March 1, 2008, 08:51 PM   #1
scrat
Senior Member
 
Join Date: February 21, 2008
Posts: 214
From Black Finish To Steel

Ok i have been reading enough information that i made a decision to de blue one of my revolvers. I took the cheapest one my pietta purchased from Cabelas. Yesterday i started really thinking then today i took out a pan took apart the gun then just let it sit in vinegar until all the finish was completley off. Then comes the thinking part everyone had been mentioning about M.A.S.S. However having once part owned a machine shop and having worked in the automotive industry for many years. I went back to my old school thinking.

The following pictures are the before pics. Look at the octagon barrel thats the subject.

1851 Navy Confederate


scrat is offline  
Old March 1, 2008, 08:52 PM   #2
scrat
Senior Member
 
Join Date: February 21, 2008
Posts: 214
AND the newly finished




scrat is offline  
Old March 1, 2008, 08:53 PM   #3
scrat
Senior Member
 
Join Date: February 21, 2008
Posts: 214
So how did i do it


1. Take the barrel and wedge off.
2. Soak the barrel, Wedge, Cylinder in Vinegar
3. I let it soak for almost an hour
4. Clean them off with hot hot water.
5. Dry off all parts.
6. Get out the Mothers

Yep Mothers Mag & Aluminum Polish
Then comes the elbow grease work. I have polished the parts for about 45 minutes. The top of the barrel i spent about 20 minutes just on that. It almost looks like a chrome finish. Now im just going to polish it up to even out the polish on all areas then lubricate all the moving parts and down the throats again.

In person it looks really sharp
scrat is offline  
Old March 1, 2008, 09:03 PM   #4
berkmberk1
Senior Member
 
Join Date: January 10, 2008
Location: Springfield, IL (formerly TX)
Posts: 187
Cool!!!!!!!

Anyone carrying one or two of these 140 or so years ago would have to go by the moniker of "Techno-Reb".
__________________
M.D. Berk
SFC USA Ret. (NRA Life Member 21 yrs)
There's nothing like a good woman, a good pistol, and a bottle of Bulleit Bourbon Frontier Whiskey
berkmberk1 is offline  
Old March 20, 2008, 02:28 PM   #5
maxymczak
Junior Member
 
Join Date: March 20, 2008
Posts: 1
i just did this......

to my .36 cal oct bbl 1851 navy after i found how you did yours.... great info !!!
maxymczak is offline  
Old March 20, 2008, 05:09 PM   #6
dgray64
Member
 
Join Date: August 27, 2007
Location: Central Texas
Posts: 47
Beautiful job!! I just ordered one of those from Cabelas today. I may make it look like yours after it gets here.

Dave
dgray64 is offline  
Old March 20, 2008, 05:15 PM   #7
scrat
Senior Member
 
Join Date: February 21, 2008
Posts: 214
Ok guys i did this around three weeks ago. Have taken out to the range a few times. Cleans just as did before. Actually seems easier to clean as the bp does not seem to build up on a polished surface. After a good shooting and cleaning. i will put a light coat of mothers mag and wheel polish on it. So yep it sure is worht it. Im planning on getting another doing the same. Then changing the grips. a good white mother of pearl.
scrat is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:30 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07822 seconds with 7 queries