The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools
Old February 2, 2008, 08:39 AM   #1
cimarronvalley
Senior Member
 
Join Date: October 7, 2007
Location: Shawnee, Ok.
Posts: 155
Howa 1500

This last fall I purchased 2 Howa 1500 Varmit (heavy barrel rifles) in .223R and .243W. I had already owned 2 Weatherby Vanguards in 30-06 and .270W (aka: Howa 1500) hunting rifles and I was satisfied by their accuracy so I bought the 2 Howa Varmits. The .243 Howa is a tack driver at 110 meters with 5 round groupings at 1" or less. The .223 Howa, however, is disapointing. It has a 1-12" twist on the barrel and will only shoot consistant 4" groups with 40-45 grain bullets. It won't stabilize bullets over 50 grains. When I tried my handload 73 grain Hornadys, the bullets didn't hit my 2'x4' target. When I tried the same loads at 30m, I found that the bullet was impacting the target sideways.
Does anyone have one of these? I know that 500m target shooters use rifle barrels with twist rates between 1-7" to 1-10" to stabilize bullets greater than 65 grains. I have a cheap little Savage/Stevens .223 with a 1-9" twist that will shoot less than 1.25" groups @ 110m with every bullet from 50-73 grains. It cost less than half the price of the Howa.
Any input? Thanks
cimarronvalley is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06774 seconds with 9 queries