The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old November 26, 2007, 11:03 AM   #1
Antelopehunter
Junior Member
 
Join Date: November 26, 2007
Posts: 1
25-06 loads

Have any of you used the 115 gain Barnes X bullets and the 120 grain Hornady Interlock bullets in the 25-06? If so would you share your load data and comments. thank you.
antelopehunter
Antelopehunter is offline  
Old November 26, 2007, 01:00 PM   #2
WCW
Senior Member
 
Join Date: March 6, 2007
Posts: 131
This loading is one of the most accurate out of my Sendero, and cloverleafs at 100 yds. are the norm. Unfortunately I have never been lucky enough to draw an antelope tag to try it out. It has truly jerked the dirt from under a couple whitetails though.

Caliber: 25-06
Case: Winchester
Bullet: Hornady 120 gr. HP
Powder: Reloader 22
Charge: 51.5
Primer: Winchester Lg Rifle
OAL: 3.263

Average velocity: 2902
Extreme spread: 12 fps.
WCW is offline  
Old November 26, 2007, 06:53 PM   #3
castnblast
Senior Member
 
Join Date: July 2, 2006
Location: Corpus Christi TX
Posts: 1,148
I'm at work, and don't have the data on the charge. sorry...The 117 BTSP is an optimal bullet. i don't have this gun anymore, but the gun I used to have really liked H4895 SC. Standard cut shot the same. It would shoot clover leafs consistantly.
__________________
VEGETARIAN...old indian word for bad hunter
castnblast is offline  
Old November 26, 2007, 07:08 PM   #4
hodaka
Senior Member
 
Join Date: April 23, 2006
Location: South Texas
Posts: 1,840
I think you mean 4831 SC. 4895 is a tad fast for the 25-06. I also use H-4831 with around 54 grains, if I recall correctly, with a 100gr. Sierra hunting bullet. My short Shaw skinny barreled winchester will put them into less than an inch at 100. Others have told me IMR 4350 is the ticket but it has not worked as well as 4831 for my rifles.
hodaka is offline  
Old November 26, 2007, 10:01 PM   #5
shooter_john
Senior Member
 
Join Date: December 11, 2002
Location: ALABAMA
Posts: 1,472
My 06 is 1/2"er easy with Hornady 117 SPBT's and IMR 3031. I'm almost positive my load is 37.0gr, but let me check that and make sure when I get home. I shot some of the Barnes 120's that I got in a trade, they don't do well at all for me. 1.5" @100 was the absoulte best I got out of 5 groups.
__________________
TROTAC.com
shooter_john is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07915 seconds with 7 queries