The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old November 8, 2007, 10:58 PM   #1
viper5243
Member
 
Join Date: December 17, 2005
Posts: 58
Looking to build a .308 Mauser

Just picked up a Mauser 98 receiver. Has BNZ 43 and has nazi proofs on it. Looking for ideas about triggers, barrels, stocks, bolts.

My ideas so far:

Barrel - no idea but want match grade and .308
Trigger - timney
Stock - Boyds Thumbhole VT
Bolt - No idea
Sights - Williams


Any other ideas?
viper5243 is offline  
Old November 9, 2007, 03:53 AM   #2
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,687
With Nazi proofs(if they're legit)it might be better to spend the bucks restoring it. For a barrel if money's no object I'd go with Krieger. They have shallow rifling which gives better accuracy but the trade off is they don't last as long. You can pick up a bolt and sights at Numrich www.e-gunparts.com
Why a match grade barrel and no scope? Kinda defeats the purpose.
Hawg is offline  
Old November 9, 2007, 06:40 AM   #3
viper5243
Member
 
Join Date: December 17, 2005
Posts: 58
Money is and isn't an object. I dont want to get crap stuff but i also don't want to spend $2000. Right now i have VZ-24 Brno 8mm thats my fathers. Everything is newer (late 50's -60's) Very nice gun. It has the williams peep on it and I have been hitting some decent shots at around 330yards with cheep romainian ammo.

I would like to go with a match just so i don't have to limit myself sight wise, in case i want to add a scope later

Really though everything is up in the air. Not to interestd in doing a restore though. If i bought it all together and fixed it up possibly but just buying the receiver id rather turn it into something else.

Im still tossing ideas around on what i want to do with it. So far i have the complete receiver (not sure what to do about the bolt though)and just ordered a boyds thumb hole stock.

How are the Parker Hale barrels? Found a "PARKER HALE HEAVY BARREL 308 WIN. TARGET BARREL" that im looking at.

Im not really sure about the cheaper barrels though. Like an $80 vs. a $200 something barrel
viper5243 is offline  
Old November 9, 2007, 08:34 AM   #4
HankL
Senior Member
 
Join Date: March 11, 1999
Location: The Sunny South
Posts: 2,174
The rifle may have enough value to the right person to pay for most of your project on an action that is not WWII marked. Just a thought.
__________________
Check 6
HankL is offline  
Old November 9, 2007, 09:47 AM   #5
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 10,985
You are set up to do all this yourself, right?

Paying a reputable gunsmith to turn a stripped receiver into a working rifle would cost more than quite a nice new gun.
Jim Watson is offline  
Old November 9, 2007, 04:11 PM   #6
viper5243
Member
 
Join Date: December 17, 2005
Posts: 58
Sorry on the wording. The receiver is not stripped. I have included pictures of the piece in question.
Attached Images
File Type: jpg pix151481031.jpg (31.0 KB, 70 views)
File Type: jpg pix151481687.jpg (19.9 KB, 58 views)
File Type: jpg pix151482343.jpg (32.3 KB, 57 views)
viper5243 is offline  
Old November 9, 2007, 04:35 PM   #7
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 10,985
Oh, OK, I thought your OP meant it did not have a bolt. At least you have a complete action to work with. Comment still applies; making a military Mauser into a sporting rifle is about as bad a money sink as a boat unless you can do the work yourself.
Jim Watson is offline  
Old November 9, 2007, 07:49 PM   #8
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,687
This was an 800.00 build quite a number of years ago on an F.N. 98 made in 51 but it does have an Obermeyer barrel. Needs a reblue now.



Hawg is offline  
Old November 9, 2007, 07:53 PM   #9
viper5243
Member
 
Join Date: December 17, 2005
Posts: 58
I have seen mauser actions on Gunbroker that advertise about kimber? They look brand new and everything, but i still like the idea of the old markings / proofs and the fact that its my own and not store bought. I have plenty of those already. I know going into this that i will never be able to get even half the money back from this build, if i ever get tired of the gun, or fall on hard times.
I have no tools for doing this myself.

I was talking to a couple gunsmiths, one said its absolutely no problem and he can make it however i want and accurate as hell, the other gunsmith (very / extreamly reputable) said it will run over $1500 but it can be done.

Last edited by viper5243; November 10, 2007 at 01:22 AM.
viper5243 is offline  
Old November 10, 2007, 01:26 AM   #10
viper5243
Member
 
Join Date: December 17, 2005
Posts: 58
What im shooting now







viper5243 is offline  
Old November 10, 2007, 08:13 PM   #11
Harry Bonar
Senior Member
 
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804
98

Sir:
I'm guessing but I think yours is a "late" Mauser. I think you'd be better off to give Douglass bbls. a call at Charleston Wva. and get them to fit one of their excellent no. 3 contour 8X57 JS bbls. to it. Load it to European standards and it's a nice "medium bore." They will also check the action for "set-back" and all.
Harry B.

Last edited by Harry Bonar; November 10, 2007 at 08:15 PM. Reason: text
Harry Bonar is offline  
Old November 10, 2007, 08:58 PM   #12
viper5243
Member
 
Join Date: December 17, 2005
Posts: 58
I already have an 8mm. Looking to get away from that and get a more common and cheaper round. i know 8mm are cheap but im tired of shooting corosive and the regular stuff is expensive.

I just picked up 23 boxes of .308, 150 gr Remington core-lokt for less then $10 a box.

Looking at the Remington 798. Putting the stock i just bought on that. Either get the whole gun for $430 + s/h or just the barreled action from MidwayUSA for $399 +s/h.
viper5243 is offline  
Old November 10, 2007, 09:45 PM   #13
Harry Bonar
Senior Member
 
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804
308

Sir:
I understnd - I get sick of certain calibers too, or, just want a change.
By the way, that Rem. 798 is the old Mark 10 Mauser action made in cz. They were sold by several companies and are good actions! However, I really like the lo-swing safeties rather than the action mounted triggers, and safeties - I even like a smooth military trogger!
The 308 is a great cartridge, I've got a "target" chamber reamer for it and have made a few in my time.
It suprises me Remington went to that action - it shows that the 98 Mauser was and is the best action on earth.
The 700, after you tear one down doesn't have the inherent strength of the Mauser. That "three ring of steel" is a crock - if a case head expands and goes you've got a junk action - with the 98 it just might vent out and not damage the action ring.
The Turk 38 Mauser is a good one - I've built 9.3X62 and 9.3X64 and 416 Taylors on them - good actions, hard where they need to be!
I wish you happiness with your choice - hope I did not offend you.
Harry B.
Harry Bonar is offline  
Old November 11, 2007, 09:50 AM   #14
HankL
Senior Member
 
Join Date: March 11, 1999
Location: The Sunny South
Posts: 2,174
Your rifle is marked bnz 43 meaning it was made by Steyr-Daimler-Puch, A.G.
in Austria in 1943 fwiw. Have fun with your project.
__________________
Check 6
HankL is offline  
Old November 13, 2007, 03:08 AM   #15
viper5243
Member
 
Join Date: December 17, 2005
Posts: 58
Anybody have any ideas on a Parker and hale heavy barrel. Found one online for $80 + ship
viper5243 is offline  
Old November 13, 2007, 01:28 PM   #16
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,427
The Parker-Hale barrels were so-so, but for $80 you can hardly go wrong since you are talking about putting iron sights on it.

You might try E R Shaw barrels. They are not match quality, but are very good barrels and very reasonably priced. You can even buy a short-reamed barrel in 308, or just send them your action to do the barreling work. Their prices are very competitive.

http://www.ershawbarrels.com/

5312 Thoms Run Road
Bridgeville PA 15017

(412) 221-3636 tel
(412) 221-4303 fax

sales@ershawbarrels.com
info@ershawbarrels.com
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old November 13, 2007, 09:06 PM   #17
Jimro
Senior Member
 
Join Date: October 18, 2006
Posts: 5,450
The Parker Hale barrel I used shoots my handloads into a 1.5 inch five shot groop at 200 yards. 168 gr HPBT, Rem Brass, 44 grains of IMR 4064, BR-2 primers (work up accordingly).

Altho guys who shoot past 600 don't have much luck with the 168 grain bullets as the slow twist in the PH barrel doesn't keep them stabilized past those ranges. I've been meaning to work up a 155 grain Palma load, one of these years.

Jimro
__________________
"Gorsh" said Goofy as secondary explosions racked the beaten zone, "Did I do that?"

http://randomthoughtsandguns.blogspot.com/
Jimro is offline  
Old November 14, 2007, 04:42 AM   #18
viper5243
Member
 
Join Date: December 17, 2005
Posts: 58
So this is just bugging me on not know what i wan to do. So far i have bought the receiver, stock, and barrel. Now i see Remington has a $30 rebate till Dec sometime. So now im tossing around the idea of buying one of those NIB off of Gunbroker for $459. Shipped to my FFL plus the rebate will come out to $475. Then i noticed i can unload the stock off of it on Gunbroker for $170ish. So that would bring it down to $305. About $95 cheaper then buying just the barreled receiver off of Midway USA not including shipping and FFL


Why are there so many god damn choices!!!! and
viper5243 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:05 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.11076 seconds with 8 queries