The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old October 31, 2007, 10:09 AM   #1
savit260
Senior Member
 
Join Date: January 2, 2006
Posts: 686
Colt Revolversmith

Do any of you know of a good Colt Revolversmith (double action Army Special/Official Police) within an hours drive of the N.E. Ma./N.H. Seacoast area?

Not having any luck in my search.

Any help would be appresheated.

I'd really rather not ship this gun if I can help it.


Thanks in advance.
savit260 is offline  
Old October 31, 2007, 03:27 PM   #2
Dfariswheel
Senior Member
 
Join Date: May 4, 2001
Posts: 6,822
There are VERY few gunsmith's around these days that are qualified to work on the old Colt action.
The Colt really IS "different" and it takes someone who's totally qualified to work on them without botching it up.
Another factor is, the Colt's REQUIRE special tooling, and very few gunsmith's have it.

Here's the ONLY people I can recommend.

The Colt factory. No knows more about it then they do, and they have all the parts (for most models) and the highly specialized tooling needed.
Their prices and turn-around are excellent, and the quality is the best.

Pittsburgh Handgun Headquarters
1330 Center Ave.
Pittsburgh, PA 15229
(412) 766-6100
Pittsburgh used to be the Colt factories over-flow center for warranty repairs.
They have parts and the quality, pricing, and turn-around are very good.

Cylinder & Slide, Inc.
245 E. 4th Street
Fremont, NE 68026
(402) 721-4277
http://www.cylinder-slide.com/
C&S is more a custom shop for super action jobs or major custom alterations, but they do do repairs.
Quality is world-class, turn-around is SLOW like all custom shops, and prices are HIGH.

Grant Cunningham gets good reviews, but I haven't personally seen his work:
http://www.grantcunningham.com/

Fair warning: Take a Colt to most any local gunsmith NO MATTER WHAT HIS REP, and it'll likely come back in worse shape than before.
True, there are locals who still know what they're doing with a Colt, but you have no way of knowing who's who.
With the above services there's no doubt about their qualifications.

Again, just because a gunsmith is a master on S&W and Ruger is means NOTHING when it comes to the old Colt action. They really are "different".
Dfariswheel is offline  
Old October 31, 2007, 08:00 PM   #3
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,321
Just curious, but what is wrong with it? I may not be able to help, but I might be able to determine how serious the problem is.

Jim
__________________
Jim K
James K is offline  
Old October 31, 2007, 08:12 PM   #4
Dithsoer
Member
 
Join Date: October 8, 2007
Posts: 17
Well, there's always the do it yourself option. If the problem isn't too serious and you are the adventurous type, Jerry Kuhnhausen has an excellent book/shop manual on the Colt double actions.
Dithsoer is offline  
Old November 1, 2007, 09:23 AM   #5
savit260
Senior Member
 
Join Date: January 2, 2006
Posts: 686
It's getting to the point where the timing needs to be adjusted.

The cylinder is not quite locking up when you do the slow thumb cock like it used to.

Cocking it quickly get's the cylinder locked in place though.

I'd like to get it adjusted before it gets any worse.

I believe this requires replacing the hand correct?
savit260 is offline  
Old November 1, 2007, 07:56 PM   #6
Dfariswheel
Senior Member
 
Join Date: May 4, 2001
Posts: 6,822
Not necessarily.
As long as it hasn't been done once before it's sometimes possible to stretch the hand.

Note that it isn't stretched where or how you might think so don't attempt it without learning the details.
Dfariswheel is offline  
Old November 3, 2007, 02:12 PM   #7
savit260
Senior Member
 
Join Date: January 2, 2006
Posts: 686
I'm not interested in working on this one myself.

I'd really like to find someone qualified localy to do this, and not ship it.


Affordable Firearms in Pelham N.H. said they know of a guy in N.H. that's an ace with old Colts, but gave me some story about having to do some kind of complicated transfer b.s. because I'm a Ma. resident. No idea what that's all about. Didn't get a clear explination either.

Couldn't get the guys name out of them.
savit260 is offline  
Old November 6, 2007, 05:50 PM   #8
savit260
Senior Member
 
Join Date: January 2, 2006
Posts: 686
Does anyone know the name of this Smith in N.H. that's experienced with double action Colts?
savit260 is offline  
Old November 10, 2007, 09:01 PM   #9
Jdomin
Member
 
Join Date: July 29, 2005
Location: Lancaster, Pa
Posts: 93
colt

might try bill adair http://www.restoration-gunsmith.com/
Jdomin is offline  
Old November 10, 2007, 10:00 PM   #10
Harry Bonar
Senior Member
 
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804
Colt

Sir:
No, I'm certainly not a Colt expert (an "ex" is a has been and a "spert " is a drip under pressure."
But your problem is not unique.
Smiths have the same problem. You take most all new 44mag 29s. and shoot a box of max 44 mag throught it and put a very slight drag on the cylinder, cock it slowly and it won't time right.
I recently obtained a Mod. 19 Smith 357 4"" bb. that has had 6 owners, shot lots, and lots! Bbl. gap is .001, crane tight, cylinder timing perfect and still in excellent shape (which is RARE, RARE, RARE!) ejector rod STRAIGHT!
It's a rare bird, but it was SET UP RIGHT BY SMITH to begin with!
I have never found Ruger revolvers suffering from this.
I think when you find a man who can fix this he will be an old fart - probably at the Colt factory - no young man will understand it.
Harry B.
Harry Bonar is offline  
Old November 10, 2007, 10:07 PM   #11
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 16,767
Tweaking the tail of the bolt (cylinder stop in S&W talk) will cause it to fall off the shelf of the rebound lever faster, thus popping up and engaging the notch of the cylinder sooner. Take some needle nose pliers and bend it ever so slightly towards the solid side of the frame.

Do a search under my name and you'll find disassembly instructions for the Colt Python in one thread and how the parts interact with one another in another thread.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08391 seconds with 7 queries