The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old October 30, 2007, 01:52 AM   #1
bigpig1
Junior Member
 
Join Date: October 30, 2007
Posts: 1
mossberg 590a safety problem

I have a mossberg 590a 12 gauge that I have had for about 9 yrs and never ever had a problem with it. Earlier this month I took it out and had the safety on the whole time (I havent used it in a while), when I go to take it off safe, a ball bearing fell out of the safety switch and is stuck on safe mode. I was wondering if I can fix the problem and if I can how. ( Internet links, or suggestions) has anyone ever come across this problem? I was wondering if it needed to be lubed...

Thanks in advanced.
bigpig1 is offline  
Old November 9, 2007, 05:06 PM   #2
MrApathy
Senior Member
 
Join Date: December 21, 2004
Posts: 520
need to remove the safety and replace the bearing. bearing shouldnt come out unless screw was too loose.

can get the parts from variety of places. might need to cut a slot into the screw to remove it this can destroy the safety carefull you dont cut into the receiver.

brownells has metal replacement safeties. egunparts has screws with slot cut instead of the mossberg security screw. reinstalling can be tricky if done wrong safety will engage under recoil. ball endmill or dremel attachment is usefull for making sure the bearing gets proper height to keep safety off under recoil.
dont want the safety screwed down too tight or loose. usually they are a little loose.
__________________
Divided and conquered, Gripped by fear
Wishful thinking that it can't happen here
It's well underways but nobody knows
A repeat of history, That's how it goes
MrApathy is offline  
Old November 9, 2007, 11:23 PM   #3
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,170
I suggest Loctite for this one. You can use it on the screw threads, then get things right before it hardens. If the parts are steel, you could stake the screw but plastic or alloy that wouldn't work.

Jim
__________________
Jim K
James K is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06211 seconds with 7 queries