rossi 92 reassembly ?

tomh1426 · October 8, 2007, 12:41 AM

For some reson i decided to field strip my puma 92 by following this
http://www.leverguns.com/articles/ta...ield_strip.htm
I cant get it back together, and Im starting to get freaked out
I couldnt get the bolt out, I cant get the lever or the bolt pin stop screw back in either.
I got the tang screw in but now the bolt hits one side of the hammer

Im gunna try and just walk away from it for now, I wont be able to sleep tonight.
I dont want to damage it because i dont know what im doing
id feel dumb taking it to a gunsmith plus i dont really wanna pay
I just got this gun, i dint even pay for it yet , can aneyone help me

tomh1426 · October 8, 2007, 01:53 PM

ok I think if i had a empty case to put on the bolt to hold in the ejector and all its stuff in place it would make this alot less complicated.
But I dont have any, so now I have to wait until wendsday to go to Cabelas and get some.
I needed them aneyway
I wish I would have left it alone

Hawg Haggen · October 8, 2007, 10:40 PM

Yeah you need an empty cartridge to keep things together. While you've go it apart you might want to check this out if you haven't already. http://www.marauder.homestead.com/files/Rossitune.htm

tomh1426 · October 8, 2007, 11:23 PM

Thats was one of the resons I wanted to take it apart.
Now I just want it back together.
Im glad I walked away, I know what needs to be done and I think I know how to do it.
Do I have to pull the bolt out to get the empty case in place.

Hawg Haggen · October 9, 2007, 07:17 PM

Don't know, never saw the need to take mine apart.

October 8, 2007, 12:41 AM	#1
tomh1426 Senior Member Join Date: September 17, 2005 Location: Youngtown Arizona Posts: 1,135	rossi 92 reassembly ? For some reson i decided to field strip my puma 92 by following this http://www.leverguns.com/articles/ta...ield_strip.htm I cant get it back together, and Im starting to get freaked out I couldnt get the bolt out, I cant get the lever or the bolt pin stop screw back in either. I got the tang screw in but now the bolt hits one side of the hammer Im gunna try and just walk away from it for now, I wont be able to sleep tonight. I dont want to damage it because i dont know what im doing id feel dumb taking it to a gunsmith plus i dont really wanna pay I just got this gun, i dint even pay for it yet , can aneyone help me

October 8, 2007, 10:40 PM	#3
Hawg Haggen Senior Member Join Date: September 8, 2007 Location: Mississippi Posts: 10,249	Yeah you need an empty cartridge to keep things together. While you've go it apart you might want to check this out if you haven't already. http://www.marauder.homestead.com/files/Rossitune.htm __________________ http://blackpowdertimes.com/index.php

October 9, 2007, 07:17 PM	#5
Hawg Haggen Senior Member Join Date: September 8, 2007 Location: Mississippi Posts: 10,249	Don't know, never saw the need to take mine apart. __________________ http://blackpowdertimes.com/index.php

October 8, 2007, 01:53 PM	#2
tomh1426 Senior Member Join Date: September 17, 2005 Location: Youngtown Arizona Posts: 1,135	ok I think if i had a empty case to put on the bolt to hold in the ejector and all its stuff in place it would make this alot less complicated. But I dont have any, so now I have to wait until wendsday to go to Cabelas and get some. I needed them aneyway I wish I would have left it alone

October 8, 2007, 11:23 PM	#4
tomh1426 Senior Member Join Date: September 17, 2005 Location: Youngtown Arizona Posts: 1,135	Thats was one of the resons I wanted to take it apart. Now I just want it back together. Im glad I walked away, I know what needs to be done and I think I know how to do it. Do I have to pull the bolt out to get the empty case in place.