The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old September 26, 2007, 02:37 PM   #1
kkduda
Member
 
Join Date: November 16, 2001
Location: PA
Posts: 27
turkey gun question

I'm interested in going fall turkey hunting this year, but I don't have a suitable turkey gun yet. I'd like some opinions on my options:

I do have a matte black winchester 1300 , 3" chamber, with a smoothbore 18" barrel and decent sights. Could I get a local gunsmith to thread the barrel to accept a turkey choke and use that?

Or should I just buy a dedicated turkey gun?

Thanks for the guidance
kkduda is offline  
Old September 26, 2007, 03:38 PM   #2
Smitty in CT
Senior Member
 
Join Date: August 30, 2006
Location: Moodus, CT
Posts: 589
You already have the PERFECT turkey gun right there...one that's already bought and paid for, LOL

To get the barrel tapped to accept chokes, it will probably cost you anywhere from $40 - $75 depending on how busy they are. Then you'll have to buy chokes...

It will probably be less expensive buying a new, or preferably used barrel. You used to be able to pick them up on eBay for $100 or so, you might want to try GunBroker or even post it on here that you're looking to buy.

You don't NEED a 3-1/2" gun to shoot turkeys and IMO, they hurt too much!!

Good Luck
__________________
Smitty

"The object of war is not to die for your country, but to make the other bastard die for his." -- Gen. George Patton
Smitty in CT is offline  
Old September 26, 2007, 03:48 PM   #3
ebutler462
Senior Member
 
Join Date: March 16, 2007
Location: NC
Posts: 437
My suggestion is to send the barrel to Polychoke and have them install their variable choke on it. Those screw-ins are a nuisance to me. You will have a very versatile gun that you can use for all of your shotgunning. The deluxe model Poly adds a couple of inches to your barrel length.

Works for me.
ebutler462 is offline  
Old September 26, 2007, 04:06 PM   #4
Zombie Steve
Senior Member
 
Join Date: June 3, 2007
Location: Old Colorado City
Posts: 527
Your shotgun will work fine, you may just have a shorter range. Make sure to pattern with the loads you will be using (I like 3" #4 or #5's) and that you feel confident with what it will do at different ranges. Know thy firearm.
I'm scouting a friend's private land over the next few evenings to see where they roost (it takes a lot of patience and beer, but it's worth it), then I'm hunting on Tuesday.

Good luck to you!
Zombie Steve is offline  
Old September 26, 2007, 04:37 PM   #5
kkduda
Member
 
Join Date: November 16, 2001
Location: PA
Posts: 27
I've looked a bit for winchester 1300 barrels and they seem hard to find, plus they are expensive ~$200!

Did ebay stop selling all gun parts? I can't seem to find much on there.

I'm going to try and pattern my shotgun with its existing barrel and see how it does.

If I don't like the results, I was already considering a polychoke, plus I'll look around for more estimates from gunsmiths to thread my barrel.
kkduda is offline  
Old September 26, 2007, 05:01 PM   #6
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 11,305
$200 for a barrel is a common price - looking around to see if you can find some used ones is about the only other way to go.
BigJimP is offline  
Old September 28, 2007, 06:45 AM   #7
timinkc
Member
 
Join Date: February 23, 2006
Location: Missouri
Posts: 23
I got a new turkey gun this spring.... a mossburg tactical turkey... like it alot. As i tend to " run-n-gun" the light weight really attracted me to it. Now if you're recoil sensetive I wouldn't suggest it, but if you're like me 6'0'' 220lbs, it doesn't really bother me (except when patterning it) very nice gun though... think it was around 459 at cabellas. The mossburg action is legendary, and although i don't shoot 3 1/2" shells very often, for a dedicated turkey gun it seems kinda lame to not have the option... again i mean on a dedicated turkey gun...

my brother also got a benelli super nova ( i think thats it, it's the pump with the pistol grip) he loves it... seems a little heavier than mine, but not much

p.s. we both got one this spring, so they must be workin'
timinkc is offline  
Old September 30, 2007, 11:35 AM   #8
bcarver
Senior Member
 
Join Date: February 22, 2007
Location: Jackson,Mississippi
Posts: 836
mossburg

I saw a mossburg 12 ga 3.5 inch single shot SSI with a screw-in choke, mounts and scope for 200. add a good tube and some camo tape and you got a light hard hitting "run and gun" rig. once sighted in and patterned youwon't feel the pain.
bcarver is offline  
Old September 30, 2007, 10:28 PM   #9
Ruger4570
Senior Member
 
Join Date: April 3, 2005
Location: Rochester, New York
Posts: 2,136
Your gun is fine as long as you get it set up for choke tubes. You need a tight choke for turkeys as you don't want to fill their body with shot, just hit the neck and head area. I use a Berreta 390 that will take 3"shells. That is more than enough at proper turkey ranges. 3 1/2" shells are way to punishing and there is no need for them. In fact, if all I had was a 2 3/4" gun, I wouldn't be the least bit worried, hell, we have been shooting turkeys and geese etc. with them for a lot more years than I can remember with sucess
Don't get hooked up on the BS
Ruger4570 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07490 seconds with 7 queries