The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old June 18, 2007, 07:19 PM   #1
Sacha Baron
Member
 
Join Date: June 17, 2007
Posts: 27
anyone use Mil Comm or Hoppes Elite oils and cleaners ?

anyone use Mil Comm and/or Hoppes Elite oils and cleaners ?

what do you think of it ?
any feedback good or bad would be appreciated

I got a little tube of Mil Comm oil/grease with my new P220 and it seemed like pretty good stuff.

I can't find out a whole lot about it either.
__________________
www.AYOOB.com
( WRC/Formula1 > * )
( P220 > * )
Sacha Baron is offline  
Old June 18, 2007, 07:55 PM   #2
Tom2
Senior Member
 
Join Date: June 23, 2004
Location: Ohio
Posts: 5,648
There are so many gun care products and variations out there that I just am boggled and cannot try them all. I have gone back to using Hoppes regular #9 again lately, but had been using 1968 mil surp. bore cleaner. Got a can of stuff that foams down the bore in a spray can, but never worked up the nerve to try it, and see if foam accidentally gushes out the end of the barrel all over the place! Did get a bottle of Gunzilla at the gunshow Sunday. Just because it is so radical being nontoxic plant products and all. Tried it on one gun that was already cleaned though. Not much else came out. I suspect that alot of products are just interchangeable variations of a formula, and about the same effectiveness. Except for the specialised copper dissolvers, etc. I am still sticking to Breakfree and FP-10 for lube duties with no probs. If no one else posts on your products, be a pioneer and write a review for us!
Tom2 is offline  
Old June 19, 2007, 09:50 AM   #3
Ocraknife
Senior Member
 
Join Date: March 19, 2002
Location: Nashville
Posts: 435
I bought several of the Hoppes Elite cleaning products and I think they are great. I used to use Hoppes 9 and the like and would fume up the house for hours but the Elite stuff seems to clean very well, is non toxic and has little or no odor. At this point I have no desire to use anything else.
__________________
Springmom on handgun myths:
"Fanny packs just SCREAM 'gun'". Fanny packs may scream "awful fashion sense" or "I'm old" or "I am carrying my diabetes supplies"
Ocraknife is offline  
Old June 19, 2007, 12:27 PM   #4
Flyfisher
Senior Member
 
Join Date: January 5, 2006
Location: Michigan
Posts: 129
Anybody familiar with Kroil?

I've been sold on Hoppe's since the 1950's when my dad would come home from hunting and clean the 16 ga in the basement...just loved that smell. I'm now in my 60's and have not had any bad outcomes with Hoppe's over some 40+ years of shooting...long and short guns. Someone told me about Kroil. I bought a can recently and ran some through the barrel of what I thought was a well cleaned revolver. The white patch came out with some black residue, albeit slight.
Do I now switch? Any experiences like this out there?
Flyfisher is offline  
Old June 24, 2007, 01:30 AM   #5
T3hK1w1
Member
 
Join Date: June 1, 2007
Location: Houston
Posts: 16
I use Hoppe's #9 grease for the slides on my semi-autos, works great.
T3hK1w1 is offline  
Old June 24, 2007, 01:50 AM   #6
GotGlock19
Member
 
Join Date: September 21, 2006
Location: Pinellas Park, FL
Posts: 94
I use the milcomm tw25b grease on my sigs's rails, then breakfree on all the other fun stuff. The grease is great, and it styas where it needs to be.
__________________
He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you. -Friedrich Nietzsche, Beyond Good and Evil, Aphorism 146
GotGlock19 is offline  
Old June 24, 2007, 08:53 PM   #7
croyance
Senior Member
 
Join Date: March 30, 2001
Posts: 3,604
Flyfisher, where did you find Kroil?
croyance is offline  
Old June 24, 2007, 09:02 PM   #8
Technosavant
Senior Member
 
Join Date: May 29, 2007
Location: St. Louis, MO area
Posts: 3,796
I use the Hoppes Elite solvent/cleaner. I do not think it cleans any better than Hoppes #9, but it doesn't smell up the house, either (my wife's request). It works just fine- no problems, but it is a bit more expensive than I'd like.
Technosavant is offline  
Old June 25, 2007, 12:32 AM   #9
stevelyn
Senior Member
 
Join Date: May 19, 2004
Location: Fairbanksan in exile to Aleutian Hell
Posts: 2,616
Hoppes' Elite Cleaner is MPro-7 repackaged and sold under the Hoppes' name.

MPro-7/Hoppes' Elite is the best cleaner I've ever used. It is the only thing that'll clean carbon stains off the face of stainless revolver cylinders.

For relubing or field cleaning I still use tried and true Break-Free CLP and LP.
__________________
Herman Cain '12

Squished bugs on a windshield is proof the slow/heavy bullet theory works.
stevelyn is offline  
Old June 25, 2007, 09:00 AM   #10
Mal H
Staff
 
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 14,418
Quote:
Originally Posted by croyance
where did you find Kroil?
I bought mine from Midway.

Kroil is a penetrating oil, not a powder solvent like Hoppe's #9, Shooter's Choice, etc. However, when mixed with a solvent, the solution seems to do a better job of cleaning. I've been mixing it by adding about 1 oz. of Kroil to each 16 oz of solvent for about the last decade or so and am very pleased with the results. Also, no need to oil a barrel after you're done cleaning.

[Added]
I just checked Midway - it's still sold there, and on sale at the moment. However, I noticed that they have added the words "Bore Cleaning Solvent" to their description. I'm not so sure that's true - the solvent part. I'd bet good money that the only thing that's been added to their product are the words themselves. (And the words aren't on the can in the picture.) It is a good quality, and conveniently packaged, penetrating oil with a few "proprietary" ingredients including trimethylbenzene in a very small quantity. Maybe that's the solvent they're talking about. It's not a very good powder solvent.
Mal H is offline  
Old June 25, 2007, 09:15 AM   #11
JWT
Senior Member
 
Join Date: March 16, 2007
Location: Tucson, AZ
Posts: 2,974
I use M-Pro7 and if Hoppes Elite is the same stuff, repackaged, it's very good. No odor, non flamable, and (as stevelyn posted) cleans the carbon off my stainless cylinder with minimal effort.
JWT is offline  
Old July 11, 2007, 10:17 AM   #12
Clayton
Senior Member
 
Join Date: July 27, 2001
Location: Bentonville, Arkansas
Posts: 267
Milcomm's products are excellent, and the real deal. Lots of folks claim their products are mil-spec and used by "special forces", etc..etc..ad nausem. Milcomm TW-25B has been used for many years by the U.S. military and others, mainly on crew-served weapons. Highly recommended if you're looking for an outstanding lubricant and grease. I've used their products since 1997.

Hoppes Elite products suck in my opinion. I've tested the whole line for a few months now and I do not recommended any of them. I also believe they're the same as the Mpro-7 line of products, which I tested several years back, and hated also.

Kroil, as mentioned, is an excellent penetrating oil, and works great for bores, especially in conjunction with JB Bore Paste to remove heavy fouling.

The Slip 2000 line of products appears to be excellent. Instructor Pat Rogers recommends them, and that's good enough for me.



www.milcomm.com
www.slip2000.com
Clayton is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09157 seconds with 9 queries