The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old May 7, 2007, 12:05 PM   #1
Ry-guy
Member
 
Join Date: October 22, 2006
Location: Proud to be Canadian
Posts: 47
40 Grain .223 load.

Hey all, when I normally put a load together I will press nine or twelve together, go to the range, fire them, make adjustments and repeat. I don't have time for that today because I am going varmint hunting tomorrow. I am asking for some input on your favorite 40 Grain load with a bolt action rifle. They will be going through the Savage Model 12FVSS. The bullets I am using are Nosler 40Grain Ballistic Tip. I know I could just pick a load out of a book but if there is anything out there that you might have that is tried, tested and true that would be great.

Ry-guy
Ry-guy is offline  
Old May 7, 2007, 12:18 PM   #2
Trapper L
Senior Member
 
Join Date: November 20, 2006
Location: South Texas
Posts: 804
I use 26.4 grs 2230 under that bullet in my Remington Varminter. It shoots under .5" at 100 yds. It is a max load per Accurate data. Otherwise, 25.0 grs of 2230 under any 55 gr bullet will get under an inch out of any 223 I've ever put it in- bolt or auto.
Trapper L is offline  
Old May 7, 2007, 12:27 PM   #3
oldcars
Senior Member
 
Join Date: March 13, 2007
Posts: 375
A friend of mine's favorite is a 40 grain siera with 25 grains of imr4064. They shoot great (5/8") in my Stevens 200 .223
oldcars is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:03 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05860 seconds with 7 queries