The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 22, 2007, 06:26 AM   #1
jsr76
Junior member
 
Join Date: April 7, 2007
Location: New York State, up north
Posts: 274
.222 Remington ballistics

Good morning. I have an old savage model 840 E .222 Rem. It wasn't much when I aquired it but since then I've done away with the barrel band and glass bedded the old girl. I now use pressure on the barrel. It shoots as well as the cartridge will reach. Meaning that as long as I can figure the drop correctly, the rifle groups well enough for woodchucks. A 22-250, or swift, she isn't However, my question is on barrel length. When I got it I noticed the barrel was bulged about 6-8 inches from the muzzle. I cut and crowned the barrel to remove the bad section and now it's a true carbine. About 17". Just long enough to be legal but quite handy. I want to use it for a modest range woodchuck rifle. Does anyone know how much the little shell will give up with a short tube? I believe it used to be a 24". I was wondering about my own theory that maybe a modest cartridge like the .222 wouldn't be significantly hurt by the shorter tube. Any information or experiences would be greatly appreciated. Thank you.
jsr76 is offline  
Old April 22, 2007, 11:14 PM   #2
williamd
Senior Member
 
Join Date: March 13, 2007
Location: SoCal
Posts: 801
A shorter bbl is a shorter bbl regardless the calibre. Seek out the fastest powder for the 222, go to a range that gives you at least 300 yards and shoot at 25, 50, 100, 150, 200, .... Pretty easy to develop your own table.

I like H322 in my 222 but I have the original longer bbl on it.
__________________
"Outlaw guns and only outlaws will have guns!" Unfortunately, we may be moving in that direction.
NRA Benefactor, Conservative!, VN '64-'65.
Never sell a gun or a car ... and retire rich!
williamd is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05813 seconds with 7 queries