The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 20, 2007, 07:16 AM   #1
Crazy4nitro
Senior Member
 
Join Date: January 15, 2007
Location: Lou-a-vul KY
Posts: 142
Bullseye in .40S&W

Last Night during an informal IDPA type shooting match several of us were discussing reloading our own bullets. Of course it went the down the usual road of what each person liked and used. I mentioned my combo (3.7gr of Bullseye under a 180gr LSWC) and a few said "You use Bullseye in a .40cal ?!? " Like it was the most stupid thing they ever heard of? The others mentioned Tite-group,Red-Dot,WSF,and Clays..(in various diff. calibers)
Am I missing some Memo going around or something? These rounds I'm making seem to shot very well with Minimal recoil and group better then the 165gr FMJ WWB that I shot during a re-shoot. I see very little if any "Glock Bulge" and no pressure signs and the slide cycles without a problem.

Signed,
Uses Bullesye in .40S&W in Louisville
Crazy4nitro is offline  
Old April 20, 2007, 07:24 AM   #2
FM12
Senior Member
 
Join Date: February 5, 2007
Location: Monroeville, Alabama
Posts: 1,606
I also use Bullseye for .40 S&W, but dont remember right now what the recipe is. Heck, I use BE in almost everything! I loves the Bullseye powder.
FM12 is offline  
Old April 20, 2007, 08:36 AM   #3
JoeHatley
Senior Member
 
Join Date: July 1, 1999
Location: Iowa
Posts: 2,135
I use Bullseye for all my handgun calibers. .38 spec --> .45 Colt

Joe
__________________
Go NRA
JoeHatley is offline  
Old April 20, 2007, 10:09 AM   #4
cheygriz
Senior Member
 
Join Date: May 11, 2002
Location: high up in the rockies
Posts: 2,232
Bullseye is fine. I don't use it, since I prefer full power loads, and I can get considerably higher velocities from HS-6 and Power Pistol.

But for target loads, Bullseye and Titegroup are fine.
__________________
If you think a mighty military force is expensive, wait 'til you see what a weak one costs.
cheygriz is offline  
Old April 20, 2007, 01:23 PM   #5
Shoney
Senior Member
 
Join Date: February 21, 2002
Location: Transplanted from Montana
Posts: 2,311
Although Bullseye is a good powder for the 40S&W, it is rarely used by IPSC shooters. In a review of:

.40 S&W IPSC Loads List
Compiled By: Jeff Maass, USPSA L-1192
Updated: 24 October 2003

In over 500 loads listed for the top shooters, there are none for BE. Although there is no reason given not to use BE, I would suspect that these top shooters have determined that there are more accurate powders.
__________________
I pledge allegiance to the Flag - - -, and to the Republic for which it stands….Our Forefathers were brilliant for giving us a Republic, not a democracy! Do you know the difference??? and WHY?http://www.wallbuilders.com/LIBissue...les.asp?id=111
Shoney is offline  
Old April 20, 2007, 02:48 PM   #6
Crazy4nitro
Senior Member
 
Join Date: January 15, 2007
Location: Lou-a-vul KY
Posts: 142
wow,interesting info...where can I find that load list?...
Crazy4nitro is offline  
Old April 20, 2007, 07:27 PM   #7
Vinnie's Dad
Member
 
Join Date: March 8, 2007
Posts: 25
The only thing I can say about bullseye is it's pretty dirty. I'm not sure if that can effect the gun with rapid shoots. I also like using it in my 45, but much slower shooting pace
Vinnie's Dad is offline  
Old April 20, 2007, 09:52 PM   #8
DWARREN123
Senior Member
 
Join Date: January 22, 2006
Location: BETWEEN TN & KY
Posts: 1,758
If it works for you and you are happy then don't worry. Ask them why they question your use of BE.
__________________
Have a nice day!
DWARREN123 is offline  
Old April 20, 2007, 11:27 PM   #9
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 3,452
"...with rapid shots..." I've been using Bullseye in my .45 for pins and everything else for eons. Works just fine. Even with all the misses.
"...seem to shoot very well..." Rule Number One. If it works, don't fix it.
T. O'Heir is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08700 seconds with 7 queries