The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 12, 2007, 09:34 AM   #1
Tadpole Starr
Member
 
Join Date: February 28, 2007
Posts: 52
380 shotshells?? No can Find

I did find them for my 45 ACP, made by CCI, but cannot find them for the 380which is ideal for carrying while prospecting the desert for rattlesnakes.

I bought some 38/357 shotshell capsuls by spear, thinking that I can cut them down, but no way can I get them small enough.

The other option that I can think of is to buy some in 9MM and remove them and put them in the 380 shell.

Could this work, OR do you have any other ideas. I could carry the 45, but it is too valuable, unless I expected trouble. I could try to shoot the snakes with bullets from the 380, but this can be dangerous. Or, I could use a rock!! Maybe send my wife out ahead of me.
Tadpole Starr is offline  
Old April 12, 2007, 10:25 AM   #2
WCW
Senior Member
 
Join Date: March 6, 2007
Posts: 131
I’ve often wondered about so called snake loads. I carry a walking stick to shoo away any rattlers that I come across, and in years of prowling around the desert, I have never had to kill one. Mostly they are going the opposite direction. I do however carry a .45 loaded to the eyes with hollowpoints for any chance encounters with the two-legged variety of snakes one can encounter in the desert these days.
WCW is offline  
Old April 12, 2007, 04:59 PM   #3
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
I don't understand why you would want to kill a rattlesnake. If you see one, leave it alone and it will leave you alone. If you don't see it and it bites you, what is the point of killing it? It's not its fault you walked into his territory. Or do you hunt them down to eat them? I've heard they are very tasty.
mrawesome22 is offline  
Old April 12, 2007, 05:16 PM   #4
tINY
Senior Member
 
Join Date: April 26, 2005
Location: Orygun
Posts: 2,589


Maybe you should pick up a second hand 38 revolver. Should be able to find one for around $200 for what you want....


-tINY

tINY is offline  
Old April 12, 2007, 06:23 PM   #5
Dave R
Senior Member
 
Join Date: January 7, 2000
Location: Idaho
Posts: 6,073
If they make them for 9mm, you MIGHT be able to make them work. If you can seat them deep enough to feed properly. .38 special shot capsules are the right diameter, but I'll bet they're too long.
__________________
I am Pro-Rights (on gun issues).
Dave R is offline  
Old April 12, 2007, 09:04 PM   #6
TEDDY
Junior member
 
Join Date: December 10, 2006
Location: MANNING SC
Posts: 837
shot shells

45acp were made for military originaly.most practicle is a revolver.shot in rifled barrel they make a donut hole pattern.
TEDDY is offline  
Old April 13, 2007, 12:01 AM   #7
DWARREN123
Senior Member
 
Join Date: January 22, 2006
Location: BETWEEN TN & KY
Posts: 1,758
380/9mm are smaller diameter bullets than 38 spl so I would think the shot capsules are also. 9mm shot capsules might work in 380 cases, have to check to see if they will chamber.
__________________
Have a nice day!
DWARREN123 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07504 seconds with 7 queries