The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 7, 2007, 01:49 PM   #1
cptmclark
Senior Member
 
Join Date: November 22, 2004
Posts: 368
Best single stage press designs

I'm about to replace my RCBS Junior press that I've been using for decades. I suspect the ram is bent, and would like to try something else anyway. I'd appreciate advice on selecting the style. Three that seem to be contenders are the Forster Co-Ax, Redding Turret, and the RCBs Rock Chucker. Others may be better. Are the cantilevered turret presses rigid enough to maintain preciese alignment? All suggestions will be gratefully recieved.
cptmclark is offline  
Old April 7, 2007, 01:51 PM   #2
rwilson452
Senior Member
 
Join Date: June 10, 2004
Location: Tioga co. PA
Posts: 2,359
When I went shopping for a new single stage my answer was the Lee Classic Cast. it's heavy duty, built for 50BMG.


I have turned out very consistant ammo on the Lee turret. I hear the new Classic turret is even better. Like their older turret but all steel.

IT comes it 3 or 4 hole models
rwilson452 is offline  
Old April 7, 2007, 02:01 PM   #3
Seven High
Senior Member
 
Join Date: December 11, 2004
Posts: 464
Would it be possible to send your RCBS junior back to the factory and have it rebuilt? It might be cheaper!
Seven High is offline  
Old April 7, 2007, 02:04 PM   #4
Shane Tuttle
Staff
 
Join Date: November 28, 2005
Location: Blue Grass, IA
Posts: 8,532
Clark,
I have to vote for the RockChucker Supreme. This thing is HEAVY duty. I must disclose that I just bought it and am in the process of finishing building my reloading station so I haven't had the chance to use it yet. However, high recommendations were given to me about this press. Also, I used the Lee Challenger press for about a decade and was told the RCBS is a venerable upgrade. I think the advise given to me so far is solid.


Have you considered sending the Junior in for repair? Then you'd have a faithful backup...
__________________
If it were up to me, the word "got" would be deleted from the English language.

Posting and YOU: http://www.albinoblacksheep.com/flash/posting
Shane Tuttle is offline  
Old April 7, 2007, 04:16 PM   #5
VaFisher
Senior Member
 
Join Date: January 24, 2006
Posts: 596
Forster

Here is what I use for accurate rifle loads.
http://www.midwayusa.com/eproductpag...eitemid=265719

Forster Co-Ax Single Stage Press

This single stage press features "Snap in and Snap out" die changing. Press also features dual floating guide rods for perfect alignment, a unique top mounted priming device and a spent primer catcher. The design of this press provides 3 times the mechanical advantage of an ordinary "C" press and easy operation for either right or left handed operation.

Press utilizes a unique shellholder jaw design that does not require standard shellholders. It has shellholder jaws that are self-actuating and open and close with the movement of the press handle. Standard jaws are included that fit the majority of standard calibers. Accepts standard 7/8 x 14 dies.
VaFisher is offline  
Old April 8, 2007, 08:37 AM   #6
rfdillon
Member
 
Join Date: April 8, 2007
Location: Houston, TX
Posts: 52
+1 on the Lee Classic Cast press. Probably the best press for the dollar out there at this time.
rfdillon is offline  
Old April 8, 2007, 06:29 PM   #7
BigJakeJ1s
Senior Member
 
Join Date: August 8, 2005
Location: Arlington TX
Posts: 650
+1 for the Forster Co-Ax. Vastly superior design to any other single stage press out there.

Andy
BigJakeJ1s is offline  
Old April 8, 2007, 08:47 PM   #8
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
I'm getting ready to buy a Lee turret. That way I can just buy a head for each cartridge I load and leave the dies in them all the time.
mrawesome22 is offline  
Old April 8, 2007, 09:17 PM   #9
amamnn
Senior Member
 
Join Date: May 13, 2006
Location: WA, the left armpit of the USA
Posts: 1,323
Forster co-ax hands down. No other benchtop press comes close.
__________________
"If the enemy is in range, so are you." - Infantry Journal
amamnn is offline  
Old April 9, 2007, 10:05 AM   #10
JoeHatley
Senior Member
 
Join Date: July 1, 1999
Location: Iowa
Posts: 2,135
A little over a year ago, I replaced my 25+ year old RCBS Reloaded Special with a Lee Classic Cast.

Very nice unit, that appears it will last for many years.

Joe
__________________
Go NRA
JoeHatley is offline  
Old April 9, 2007, 02:34 PM   #11
FM12
Senior Member
 
Join Date: February 5, 2007
Location: Monroeville, Alabama
Posts: 1,598
+ another vote for the Forester Co-Ax...none finer. Atleast one of the Army marksmanship units loads on one of these. OUTSTANDING!! I've loaded a bazillion rounds since 1978 when I bought it second hand!
FM12 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09031 seconds with 7 queries