bullseye

ECLIPSE45ACP · March 16, 2007, 10:19 AM

simple question, is this a ball powder like 231?

JoeHatley · March 16, 2007, 10:46 AM

Flake powder.

Joe

ECLIPSE45ACP · March 16, 2007, 10:51 AM

so it probably wont meter very well in an autodisk?

.45 Vet · March 16, 2007, 01:57 PM

Been using it for 9mm,.38 wadcutter, and .45acp for just about twenty years in a Pro-1000. There's a little leakage, but I'm told the new style wiper does a good job of fixing that. I'm just punching paper and not pushing max loads, but I seem to be able to hold + or - 1/10th grain variation just fine....

CrustyFN · March 16, 2007, 08:20 PM

I have used Bullseye in my Pro Auto Disk for 9mm and not had any problems.
Rusty

williamd · March 16, 2007, 10:42 PM

Use BE in my green machine (RCBS) for years and has worked fine for several loads/weapons. I weigh random loads but only 1 in 100.

pumpkinheaver · March 18, 2007, 07:31 PM

I use bullseye for 90% of my handgun loads and have never had a problem with it metering from my lee powder measure.

LAH · March 19, 2007, 07:54 AM

Bullseye is no problem from my Lyman 55 or Dillon...............Creeker

TEDDY · March 19, 2007, 08:32 PM

I understand that bullseye was dust from making shotgun powder.it worked so well they began to make it on purpose.
lymans #47 reloading book shows the powder.does any one here read the manuals.spend hundreds on tools and have to drag you screaming to read the basics.I guesss I'm getting to old and crockity.

LAH · March 19, 2007, 08:41 PM

I've got a Lyman 47. Bullseye is not ball. I've got a Lyman 45. Bullseye is not ball. Still though it feeds through my Lyman 55 and Dillon. I wouldn't call it dust though. Can't find a smilie so HEE HEE

rfdillon · April 8, 2007, 08:13 PM

I find that Bullseye meters much better in my Redding powder measure than does Unique.

March 16, 2007, 10:19 AM	#1
ECLIPSE45ACP Senior Member Join Date: January 9, 2007 Location: Omaha, NE Posts: 177	bullseye simple question, is this a ball powder like 231?

March 16, 2007, 10:46 AM	#2
JoeHatley Senior Member Join Date: July 2, 1999 Location: Iowa Posts: 2,135	Flake powder. Joe __________________ Go NRA

March 16, 2007, 08:20 PM	#5
CrustyFN Senior Member Join Date: June 4, 2006 Location: West Virginia Posts: 2,203	I have used Bullseye in my Pro Auto Disk for 9mm and not had any problems. Rusty __________________ I don't ever remember being absent minded.

March 16, 2007, 10:42 PM	#6
williamd Senior Member Join Date: March 13, 2007 Location: SoCal Posts: 801	Use BE in my green machine (RCBS) for years and has worked fine for several loads/weapons. I weigh random loads but only 1 in 100. __________________ "Outlaw guns and only outlaws will have guns!" Unfortunately, we may be moving in that direction. NRA Benefactor, Conservative!, VN '64-'65. Never sell a gun or a car ... and retire rich!

March 18, 2007, 07:31 PM	#7
pumpkinheaver Senior Member Join Date: May 22, 2006 Location: Missouri Posts: 294	I use bullseye for 90% of my handgun loads and have never had a problem with it metering from my lee powder measure. __________________ Just because your paranoid don't mean they aint out to get ya.

March 16, 2007, 10:51 AM	#3
ECLIPSE45ACP Senior Member Join Date: January 9, 2007 Location: Omaha, NE Posts: 177	so it probably wont meter very well in an autodisk?

March 16, 2007, 01:57 PM	#4
.45 Vet Senior Member Join Date: May 21, 2004 Location: Western Penn. Posts: 358	Been using it for 9mm,.38 wadcutter, and .45acp for just about twenty years in a Pro-1000. There's a little leakage, but I'm told the new style wiper does a good job of fixing that. I'm just punching paper and not pushing max loads, but I seem to be able to hold + or - 1/10th grain variation just fine.... __________________ For those who've never fought for it, the price of freedom shall never be known...

March 19, 2007, 07:54 AM	#8
LAH Senior Member Join Date: March 22, 2002 Location: In The Hardwoods Posts: 736	Bullseye is no problem from my Lyman 55 or Dillon...............Creeker

March 19, 2007, 08:32 PM	#9
TEDDY Junior member Join Date: December 10, 2006 Location: MANNING SC Posts: 837	bullseye I understand that bullseye was dust from making shotgun powder.it worked so well they began to make it on purpose. lymans #47 reloading book shows the powder.does any one here read the manuals.spend hundreds on tools and have to drag you screaming to read the basics.I guesss I'm getting to old and crockity.

March 19, 2007, 08:41 PM	#10
LAH Senior Member Join Date: March 22, 2002 Location: In The Hardwoods Posts: 736	I've got a Lyman 47. Bullseye is not ball. I've got a Lyman 45. Bullseye is not ball. Still though it feeds through my Lyman 55 and Dillon. I wouldn't call it dust though. Can't find a smilie so HEE HEE

April 8, 2007, 08:13 PM	#11
rfdillon Member Join Date: April 8, 2007 Location: Houston, TX Posts: 50	I find that Bullseye meters much better in my Redding powder measure than does Unique.