The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 4, 2007, 05:15 PM   #1
CrustyFN
Senior Member
 
Join Date: June 4, 2006
Location: West Virginia
Posts: 2,258
Pro Auto Disk Question

I am getting ready to start loading 223 and have heard posters talk about the double disk kit does not throw enough powder. I was wondering if anybody has tried stacking three disks and buying longer bolts from the hardware store. I thought this would be cheaper than buying a new powder measure. OK flame suit on, go ahead and tell me I'm crazy.
Rusty
__________________
I don't ever remember being absent minded.
CrustyFN is offline  
Old March 4, 2007, 07:30 PM   #2
Scott5
Senior Member
 
Join Date: November 25, 2004
Posts: 132
Hey CrustyFN,
I wouldn't say crazy but if you had 2 riser kits it might work if it didn't leak.

http://www.leeprecision.com/cgi/cata...632.3126=90195

Happy reloading and shooting.

Scott5
Scott5 is offline  
Old March 4, 2007, 11:59 PM   #3
amamnn
Senior Member
 
Join Date: May 13, 2006
Location: WA, the left armpit of the USA
Posts: 1,323
I've used it-it will certainly drop enough for .223--that's not the trouble with it---would you like a free one? I 'll send it to you if you pay the postage.

Hint: if it's more than a dollar to mail--it's not worth it.
__________________
"If the enemy is in range, so are you." - Infantry Journal
amamnn is offline  
Old March 5, 2007, 11:09 AM   #4
Fiddler 5.56
Member
 
Join Date: March 5, 2007
Posts: 27
Hello, my first post here.
I'm waiting for LEE to fix my Loadmaster so pulled out my old single stage to keep busy.
What I did, is used one disc that dispensed a half charge . Double charge to get correct load. The travel is not a full stroke, so don't find much of an inconvience. Using the pro auto disk, case activated.
Fiddler 5.56 is offline  
Old March 5, 2007, 02:26 PM   #5
swmike
Senior Member
 
Join Date: June 25, 2005
Location: Marysville, WA
Posts: 658
I just finished 1,000 rounds of 5.56 using my old Lee Progressive 1000 and an AutoDisc with doubled disks. They will drop more than enough powder. I was using two .92 disc's with IMR4064 (Just to use it up, next batch will be with H-335). To make sure the loads dropped consistently, I scotch taped the edges so the cavity's lined up as close as possible.

Most loads require the double disc in 223/5.56.


For the half stroke issue, make sure the disc is installed correctly with the actuator lever in the proper hole on the bottom of the disc. Also that the die is screwed into the plate enough to give a full operating stroke when the shell is at the top of its travel.

I upgraded my Autodisc powder measure to the newer style hopper and actuator for less than $15. Don't care for the adjustable powder bar that much (but it came for free) but do like the polymer wiper. My measure has dropped loads consistently within +/-.1 gr in extruded and dead on in ball powders.

The adjustable bar hates any load under 6 gr using unique.
__________________
My definition of Gun Control--- A steady grip and hitting your target.


"In God we trust, all others are suspects."

"If I shoot all the ammo I am carrying, either I won't need any more, or more won't be of any help".

____________________________________________
swmike is offline  
Old March 5, 2007, 02:54 PM   #6
Abstract
Junior member
 
Join Date: December 25, 2006
Posts: 443
It's pretty easy to modify an adjustable charge bar so that you can stack two adjustable charge bars in the double disk kit. Lee won't tell you how to do it, but it really is simple. It'd be a lot easier to just go with a drum-type measure, such as RCBS or Hornady, both of which will work just fine on your Lee press.
Abstract is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07717 seconds with 7 queries