The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 14, 2007, 12:37 AM   #1
hags
Senior Member
 
Join Date: August 29, 2005
Location: Northern Illinois
Posts: 151
Newbie Dumb Question

I'm thinking of getting my feet wet with reloading.
I was wondering if you can use dies from one manufacturer in another manufacturer's press.
I was looking at getting a Lee Classic 4 hole turret press and have access to RCBS dies.
Thanks.
hags is offline  
Old January 14, 2007, 12:49 AM   #2
Smokey Joe
Senior Member
 
Join Date: July 14, 2001
Location: State of Confusion
Posts: 2,064
There are no dumb questions!

And if there were, they'd still be a lot easier to handle than dumb mistakes!

Hags--The answer to yr question is "mostly." There are a few exceptions, the Dillon Square Deal B being the commonest AFAIK--it uses its own proprietary dies, which are NOT interchangeable with anything else, including other Dillons. But for most reloading presses, and dies, Thank God someone had a severe attack of common sense back when they were being designed, and most dies and presses are completely interchangeable.

I can't begin to imagine the state in which reloading would be at present, if RCBS dies only fit RCBS presses, Lyman only Lyman, Dillon only Dillon, Posness-Warren only Posness-Warren, and so forth. Yech.

Your Lee Classic press and RCBS dies will work just fine together.

BTW, have you got the "standard text" on reloading? It's The ABC's of Reloading put out by Krause Publishing, www.krause.com Get it @ yr local sptg gds sto, gun sho, the I'net, or order direct from the publisher. Tons and tons of good info for beginner and expert alike.

Oh, and welcome to The Magnificent Obsession--Reloading!
__________________
God Bless America

--Smokey Joe
Smokey Joe is offline  
Old January 14, 2007, 12:51 AM   #3
Rimrod
Senior Member
 
Join Date: October 19, 2005
Location: Behind enemy lines
Posts: 1,309
Yes, RCBS dies work in LEE presses. Most Dies and presses use a standard 7/8X14 thread. There are exceptions however like one of the Dillons and the old Lyman 310 loader.
Rimrod is offline  
Old January 14, 2007, 12:56 AM   #4
arkie2
Senior Member
 
Join Date: September 3, 2006
Posts: 475
If you get RCBS dies make sure (if it's pistol dies) that they're carbide dies. Lee pistol dies are carbide but I'm not sure about about RCBS.
arkie2 is offline  
Old January 14, 2007, 02:36 AM   #5
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
Most presses are universal. I can even use 2 different size dies on my Rock Chucker Supreme. 7/8 by 14 with the insert in and 1/2 by 12 with the insert out. I think those are the dimensions.
mrawesome22 is offline  
Old January 14, 2007, 02:04 PM   #6
CrustyFN
Senior Member
 
Join Date: June 4, 2006
Location: West Virginia
Posts: 2,257
Great choice on presses also I might add. If you haven't bought it yet check out Cabela's, they have the classic turret in a kit now for $149.
Rusty

http://cabelas.com/cabelas/en/templa...847&hasJS=true
__________________
I don't ever remember being absent minded.

Last edited by CrustyFN; January 14, 2007 at 11:43 PM.
CrustyFN is offline  
Old January 14, 2007, 02:07 PM   #7
sanson
Senior Member
 
Join Date: December 21, 2006
Location: FL panhandle
Posts: 547
without reloading & testing shooting would be boring
__________________
www.sansoneservices.com
sanson is offline  
Old January 15, 2007, 11:13 AM   #8
blancoman
Member
 
Join Date: December 28, 2006
Posts: 37
Put my Lee Classic Turret Press together over this last weekend. Some things to think about. First of all, even with the double disk adapter kit, the pro powder measure will only throw about 42 gr of powder. The pro powder measure is designed to throw for pistols or maybe something small like a 223. The safety auto prime works and I am sure I will get better with it. Takes a little getting used to. If you are loading a rifle you will need a thru the expander powder die. All that having been said. I was loading about 150 rds an hour in the first hour. Like I said, It will get faster. Dillon is better but do you really need something that produces 400 rds. an hour? For the money, the little lee cast press is hard to beat.
blancoman is offline  
Old January 15, 2007, 02:21 PM   #9
rangermonroe
Senior Member
 
Join Date: January 27, 2005
Location: savannah
Posts: 758
I use my grandfathers CH dies in my LEE, and my RCBS dies in my CH presses without a problem. They are all 7/8 x 14.

I love the common sense idea from yesteryear.
rangermonroe is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:49 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08340 seconds with 7 queries