|January 4, 2007, 11:25 PM||#1|
Join Date: January 4, 2007
New to reloading, need some help
Hey all I'm new to the forum and was thinking about reloading, and could use some advice. I'm on a budget so I can't afford the best. I was wondering how would this setup work, and do I have everything I need?
Lee Challenger Press Kit with Free Ram Prime,
Powder Funnel and Sizing Lube 2 oz
Lee Pacesetter 3-Die Set 223 Remington
Lee Cutter with Ball Grip
Lee Case Length Gage and Shellholder 223 Remington
Lee Collet Neck Sizer Die 223 Remington
Lee Universal Depriming and Decapping Die
Lee Improved Powder Measure Kit
|January 5, 2007, 01:32 AM||#2|
Join Date: June 29, 2000
Location: Rupert, Idaho
Lycan5100, if your on a tight budget, get the Lee anniversay kit. Midway has it listed for $89.99, but you can get it at Sportsman Wharehouse (or most other large sporting stores) for around $69.99. Then the only thing you need are a set of dies and a caliper.
'Course you will need brass, bullets, powder and primers. If you've been saving your fired brass, then that's one less thing to buy.
This is probably the cheapest way to get into reloading, especially if you find out you don't like it (can't imagine why, but some do!).
National listings of the Current 2A Cases.
|January 5, 2007, 05:32 AM||#3|
Join Date: November 15, 2005
Before you buy presses and the rest of the gear, pick up a couple of loading manuals and read then cover to cover. Then you'll have a much better idea of what your basic needs are for the equipment. Plus to load safely you'll need the manuals anyway so it isn't money that's wasted.
|January 5, 2007, 07:56 AM||#4|
Join Date: June 9, 2005
Do you want cheap?
I would suggest the Lee Classic Loader. This is the most hands on tool, but will produce very good, accurate ammo. Cabela's has it for $13.99. If you enjoy the process, step up into the Lee Anniversary Kit. Get a few good manuals.