The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools
Old December 12, 2006, 10:26 PM   #1
chevyguy
Junior Member
 
Join Date: October 23, 2005
Posts: 14
Stevens 200

Hey guys,

I am thinking about getting a Stevens 200 in 308 do any of you have one? How is it? I cant really afford to spend 1200 or more for a " sniper type rifle" (you know for those unreully milk jugs, and cans) for my small collection. How do you think this one would be with a decent scope and bipod?

Thanks in advance


Chevyguy
chevyguy is offline  
Old December 12, 2006, 11:52 PM   #2
rem33
Junior member
 
Join Date: March 31, 2006
Posts: 1,528
I have heard they are the same as Savage without the accutriger and a less expensive stock. For what your wanting they should be just fine.
rem33 is offline  
Old December 13, 2006, 12:14 AM   #3
FirstFreedom
Junior member
 
Join Date: May 31, 2004
Location: The Toll Road State, U.S.A.
Posts: 12,451
Lots of guys start out with the Stevens 200 as a base for slowly building a precision rifle as funds permit. Out of the box, it will be a performer with good ammo. As time goes on, get a better stock, better trigger, maybe glass and/or pillar bed job, and upgrade optics, etc. I'd say go for it - you won't be disappointed.
FirstFreedom is offline  
Old December 13, 2006, 01:31 AM   #4
fourrobert13
Senior Member
 
Join Date: November 28, 2005
Location: South West Ohio
Posts: 336
I am also looking at this very same rifle. It has gotten some good reviews in a couple of the gun magazines. If all goes right, hopefully after the holidays, I will get one.
__________________
Be aware of yourself and everything around you.
fourrobert13 is offline  
Old December 13, 2006, 04:56 PM   #5
chevyguy
Junior Member
 
Join Date: October 23, 2005
Posts: 14
Thanks guy's,

Yes afetr the holidays I will hopefully be able to hunt one down


Chevyguy
chevyguy is offline  
Old December 14, 2006, 12:36 AM   #6
tINY
Senior Member
 
Join Date: April 26, 2005
Location: Orygun
Posts: 2,589

Before you get the bipod, check the deflection of the forend - you don't want the stock to touch the barrel if you can help it. It'll likely give you accuracy problems, especially if you are using a bipod.




-tINY

tINY is offline  
Old December 14, 2006, 09:41 PM   #7
chevyguy
Junior Member
 
Join Date: October 23, 2005
Posts: 14
Thanks I had not thought of that


chevyguy
chevyguy is offline  
Old December 15, 2006, 11:12 PM   #8
stormspotter
Member
 
Join Date: December 15, 2006
Posts: 57
Stevens 200

Just joined The Firing Line so I thought I would jump right in.

I have a Stevens 200 in 223 Remington and like it very much. I also have a Savage 10FP in 223 but I also wanted a light carry around rifle with a 1 in 9" twist. I put an earlier model Tasco World Class on 3X9 on it and it will shoot under 1" groups with several of my handloads.

The Stevens 200's are made on the same machinery as the Savages. The stock is on the lighter side, but I found a used Savage short action wood stock and it fits the Stevens fine.

I have been very pleased with mine and feel they are one of the best buys around.
stormspotter is offline  
Old December 16, 2006, 12:12 AM   #9
Fremmer
Senior Member
 
Join Date: June 19, 2005
Location: Nebraska
Posts: 3,482
Good info, Storm and Tiny. I'd like to find one in .308 Win.
Fremmer is offline  
Old December 21, 2006, 06:26 PM   #10
shadowwodahs
Junior member
 
Join Date: August 24, 2006
Location: Tennessee/moving to Northern Michigan
Posts: 24
Stevens 200 Accuracy

The 308 is not as accurate as the 223 for some reason. The 308 leaves the factory if it can shoot 3 inch groups at 100 yards. The 223 will shoot sub-MOA at 100 yards per several gun forums that I have read. Savage say's 69 grain bullets are best with this gun since it has a 1 in 9 twist rate! If you decide to get a 308, call Savage to see which grain bullet they reccomend for best accuracy. It all depends on what you are going to do with the rifle - I use mine for target shooting as I don't hunt. I figure if I can shoot under 1 inch at 200 yards, then this can be a serious survival/personal defense weapon.
shadowwodahs is offline  
Old December 22, 2006, 10:20 AM   #11
rezmedic54
Senior Member
 
Join Date: April 25, 2005
Location: Arizona
Posts: 288
Stevens 200 Bolt

I have one in 7 mm Rem Mag. I had to stiffen the stock up a little but other than that I love it . Started to break in the barrel per Savage. I decided to try out the new Wolf Gold line ammo and was impressed at 100 yds. 5/8 inch groups with this ammo. So now I have a great rifle that shoots pretty good groups on Cheap ammo can't ask for more now can you. Be Safe Out There Kurt
__________________
Kurt Pietrzak
Maricopa Shooting Service
S.W.A.T. South West Airsoft Tactical
CCW Instrutor
NRA Certified Instructor
Gunsmith
Maricopa ,Az.

http:www.maricopashooting.com
rezmedic54 is offline  
Old December 22, 2006, 11:08 AM   #12
Jimro
Senior Member
 
Join Date: October 18, 2006
Posts: 5,289
I have an older savage 10FP (without accutrigger, flat rear) in 308, it shoots plenty accurate. 3" groups at 100 sounds like bad (ie surplus) ammo. With handloads mine is sub MOA at least out to 200 yards (1.5 inch five shot group).

I replaced the factory trigger with a Timney, well worth the money in my opinion. Don't know if the newer factory triggers still use a flat spring, but if they do, you'll want to replace it eventually.

The Stevens 200 is a good starting point for a homebuilt custom, and it's a darn good rifle in it's own right.

Jimro
Jimro is offline  
Old December 22, 2006, 01:32 PM   #13
lg_mouth
Senior Member
 
Join Date: December 22, 2006
Location: Pomeroy, OH
Posts: 161
Flimsy stock and bipod

I am new here as well and wanted to put my $.02 in on the Stevens 200. I love mine in .243, but have read over on savageshooters.com that putting a bipod on one may harm your accuracy because of the flex in the flimsy stock.

I would also recommend, that if you are keeping the factory stock, to sand down the rough edges and paint it with some Krylon Fusion. I painted mine OD green, which is a much better color than light gray!

Lg_mouth
lg_mouth is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:27 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09776 seconds with 9 queries