The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Lock and Load: Live Fire Exercises

Reply
 
Thread Tools
Old May 7, 2009, 01:40 PM   #1
twocan
Member
 
Join Date: December 6, 2008
Location: Key West
Posts: 24
Bullet Box Construction

Indoor Bullet Box

I am considering building a 4 foot by 8 foot Bullet Box for .22LR fired from my Glock 26 using the Advantage Arms Conversion Barrel from approximately 15 to 18 feet away.

Does anyone know what kind of backing material I would need to use to prevent penetration through the back of the box?

My initial design ideas are to use a 2x8 wood frame with 3/4" plywood for the back and possibly a steel plate and/or rubber sheet to contain the bullets with a thin sheet of plywood for the front.

I have not yet found the data necessary to calculate the forces generated by 40 grain .22LR bullets.

As a side benefit, it will make good cover in case of a home invasion.

Capt. Art
twocan is offline  
Old June 24, 2009, 06:07 PM   #2
Superhouse 15
Senior Member
 
Join Date: September 13, 2007
Location: Sunny Florida
Posts: 844
Can't speak for the box itself. There are commercial traps available that have an angled back. The bullet strikes and is broken up and deflected into the base of the box. You might look at those and copy.

As for energy, simple:

Velocity squared x weight in grains
_____________________________ (divided by)

450240

An example 40gr RN at 1050FPS= 97.9FPE
Superhouse 15 is offline  
Old June 27, 2009, 11:21 PM   #3
oneounceload
Junior member
 
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
shooting .22 indoors will also have the issue of lead exposure from the bullets when firing....you need to consider ventilation also.......

as to the backstop, a piece of steel plate angled to send bullets down into a bed of sand works well
oneounceload is offline  
Old June 28, 2009, 04:00 PM   #4
mikejonestkd
Senior Member
 
Join Date: January 3, 2006
Location: Brockport, NY
Posts: 2,753
Our local club has a .22 indoor range and they use a heavy steel plate angled down into a bed of sand and it stops everything.

As mentioned above, ventilation is a primary concern. We have several fans that are located downrange that draw the air away from the shooter and out vents above the targets. fresh air comes from intake vents behind the shooters. That way the air is always moving away from the people.

You don't mention where you are located. It is illegal to discharge a firearm in some residential neighborhoods/ many towns/ most city limits. look into the legalities before you begin.
be safe
__________________
You are the bows from which your children as living arrows are sent forth.
mikejonestkd is offline  
Old July 21, 2009, 09:34 PM   #5
booker_t
Senior Member
 
Join Date: July 21, 2009
Posts: 797
2" of RHA backed by 1" of HHA should do the trick for pretty much anything you choose to shoot, unless you have a stock of homemade EFPs or some leftover RPG-7Gs you're eager to pop off.
booker_t is offline  
Old July 22, 2009, 08:39 AM   #6
Uncle Buck
Senior Member
 
Join Date: June 21, 2009
Location: West Central Missouri
Posts: 2,561
I am also looking to build a bullet trap, but for large calibre hand guns. What are the initials "RHA" and "HHA"?

Thanks.
Uncle Buck is offline  
Old July 22, 2009, 09:14 PM   #7
booker_t
Senior Member
 
Join Date: July 21, 2009
Posts: 797
RHA: Rolled Homogeneous Armor
HHA: High Hard Armor
booker_t is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:20 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08256 seconds with 9 queries