The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools
Old August 22, 2011, 07:11 PM   #1
ldjamin
Junior Member
 
Join Date: August 22, 2011
Posts: 1
20MM MK4 E.K.1944 ~ UNFIRED round?

Last year an aggressive beach refurbishment project took place near my house in Southern California. The process includes dredging tons of sand from beneath the waters directly offshore and pumping it back to the beach. In addition to a prehistoric sharks tooth, I found a 20MM round that appears to be UNFIRED. (see pics).

I’m wondering what type of round it is? Clearly the outer jacket has deteriorated leaving the inner “bullet” intact. Any idea what type of round this was?? I was told that the Japanese planes carried these rounds? I’d be interested to hear if anyone as a theory as to “how” it might have ended up in the Pacific ocean off Sunset Beach???

Thanks in advance…

Lance
Attached Images
File Type: jpg 20MM Round.jpg (14.8 KB, 182 views)
File Type: jpg 20MM Round End.jpg (29.5 KB, 160 views)
ldjamin is offline  
Old August 22, 2011, 07:38 PM   #2
James K
Staff
 
Join Date: March 17, 1999
Posts: 20,005
Boy, that is really encrusted. E.K. is Eastman Kodak. The round is a standard U.S. Navy 20mm cannon round, not Japanese.

Since you don't know what kind of projectile it has, I would strongly recommend you contact the police or the military for safe disposal. It may be badly encrusted but that does not mean there is not a live explosive shell under that crud. (I am not talking about the propellant charge, but about an explosive projectile, which could be a lot more dangerous and could go off if the round is dropped.)

If the projectile is explosive, it is illegal to own under federal law, one more reason for turning it in.

Jim

P.S. Please don't just toss it or put it in the trash for someone else to find and maybe be injured.

JK
__________________
Jim K
James K is online now  
Old August 22, 2011, 07:49 PM   #3
Missing Something
Junior Member
 
Join Date: August 14, 2011
Posts: 2
Its a 20mm Oerlikon round made in 1944 by Eastman Kodak Co.
Be careful as there could be an explosive projectile in there and it looks corroded enough to be dangerous...
Missing Something is offline  
Old August 22, 2011, 09:08 PM   #4
johnbt
Senior Member
 
Join Date: December 6, 1999
Location: Richmond, Virginia USA
Posts: 6,004
A Civil War cannonball killed a local collector in 2008. He was restoring it and it went off. He wasn't new at it, he'd worked on about 1600 of them. A chunk of it went through a porch a quarter-mile away.

http://www.military.com/news/article...collector.html
johnbt is offline  
Old August 23, 2011, 06:53 AM   #5
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 36,321
"Its a 20mm Oerlikon round made in 1944 by Eastman Kodak Co."

Kodak made the cases only, since they had metal stamping and forming equipment for manufacturing cameras.

Once the cases were made, they were shipped out to, I believe, Watervliet Arsenal for loading.

Supposedly Kodak only made the cases during 1944, but some have turned up stamped 1943, and others claim to have seen cases stamped 1945.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old September 15, 2011, 02:57 AM   #6
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 4,488
well.......

I'd expect the entire Pacific coast was fortified or had armed naval vessels offshore at many or most points during WWII, so a 20mm rd in the vicinity could be easily explained. I was on a hurricane cleanup for Ivan a few years back and a member of my team turned up a 40mm Bofors round in coastal Gulf Shores AL . The Hazmat officer pitched a holy fit.

Not an expert, but that projectile looks odd..........I dunno. I have a 20mm Ork. round that was used as a paper weight, engraved with dates from a mfg plant I suspect, that looks nothing like what you have.

The effects of corrosion may have "pruned" your projectile somehow.

Almost looks like a cannister round don't it?
bamaranger is offline  
Old September 16, 2011, 12:58 PM   #7
BlueTrain
Senior Member
 
Join Date: September 26, 2005
Location: Northern Virginia
Posts: 5,825
There were a lot of new fortifications built on both the East and West coasts during WWII, mostly all still there. But I'd be surprised that many 20-mm guns were in use in land fortifications, although I suppose it is highly likely.
__________________
Shoot low, sheriff. They're riding Shetlands!
Underneath the starry flag, civilize 'em with a Krag,
and return us to our own beloved homes!
Buy War Bonds.
BlueTrain is offline  
Old September 17, 2011, 05:41 AM   #8
grumpa72
Senior Member
 
Join Date: April 5, 2009
Posts: 465
I would guess that proper disposal of this round would be the safest thing to do unless you are trying to join the leagues of Darwin Award candidates.

Let's see, explosive round; exposed to corrosive environment, unknown condition of propellent and explosive.
grumpa72 is offline  
Old September 17, 2011, 07:55 AM   #9
SDC
Senior Member
 
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,644
It looks to me like an armour-piercing round that has had the outer jacket corroded off, but that doesn't mean that it's safe to handle. This would have been fired from a single- or double mounting of these:

__________________
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936.
SDC is offline  
Reply

Tags
20mm , mk4

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:51 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08092 seconds with 10 queries