The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old October 22, 2006, 10:38 PM   #1
T-Bear
Senior Member
 
Join Date: November 23, 2005
Posts: 119
Anybody use Shot Capsules

An eariler post concerning 44mag shotshelss got me thinking into making my own for 45LC.
Browsing through Midway, I found these:http://www.midwayusa.com/eproductpag...eitemid=682652

Just wondering if anybody have tried these out and how do they load. I am guessing that the capsule filled with shot will fit inside of a 45LC case? Or is the capsule itself the actually case in which it will be fired from?

Any info or input from past users will be very helpful.

Thank you
T-Bear is offline  
Old October 22, 2006, 11:51 PM   #2
suemarkp
Member
 
Join Date: June 19, 2006
Location: Kent, WA
Posts: 17
There are the exact same things the factory shot shells use. The capsule is the "Bullet" and you fill it with the size shot you want. They are smaller than normal bullet diameter (so the rifling doesn't engage them), but are the easiest way to get started with shotshell handloads. Be careful with crimping. You need to crimp because even without neck expanding, they fit too loose. But crimp too much and you crack the blue capsule.
__________________
Mark
Kent, WA
suemarkp is offline  
Old October 23, 2006, 12:26 AM   #3
T-Bear
Senior Member
 
Join Date: November 23, 2005
Posts: 119
Thanks for the reply, This will be my first attempt in loading shotshells. I like these because it already gives me some load data at which to start at, but the big plus is that the shot will not touch the rifling for a more better pattern.
T-Bear is offline  
Old October 23, 2006, 01:33 AM   #4
JJB2
Junior member
 
Join Date: December 14, 2005
Posts: 558
go to SHOOTERS FORUM and look for speer shot capsule reloading... there is lots of information on there right now.....
JJB2 is offline  
Old October 23, 2006, 06:30 PM   #5
hodaka
Senior Member
 
Join Date: April 23, 2006
Location: South Texas
Posts: 1,851
Have any of ya'll tried these in a 45ACP? I remember an article in American Rifleman a few years ago about reloading shot capsules for a 45ACP but I forget what they were using for the capsule.
hodaka is offline  
Old October 23, 2006, 10:16 PM   #6
flutedchamber
Member
 
Join Date: July 14, 2005
Location: New Jersey
Posts: 61
Basically just follow the directions on the box of capsules and you will be ok. Stick with shot on the smaller size (around #9 is good) for tight patterns. I have used 45 colt shotcaps in 45 acp, and they work. Have to single load them, but they work. Have fun.
flutedchamber is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06603 seconds with 7 queries