The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old October 17, 2006, 08:58 PM   #1
turkey45
Junior member
 
Join Date: August 29, 2006
Posts: 39
reloading the 22 Hornet,,newbie Question??

..ok im a newbie,,what size bullet do i need??
whats a good load???any-type of info will be read.
..thanks gang..
turkey45 is offline  
Old October 17, 2006, 09:12 PM   #2
OneInTheChamber
Senior Member
 
Join Date: December 12, 2005
Posts: 789
You need a good reloading book. Try Lee's Modern Reloading.

Reloading from information given on the internet is a recipe for disaster. Always, always, always get your information from a reputable reloading book or directly from the powder companies website.

That's my advice. The book will tell you exactly what size, weight, and type of bullet will go with what kind and what amount of powder over the right kind/size of primer.
__________________
Insert witty, comical, and/or significant quote here.
OneInTheChamber is offline  
Old October 17, 2006, 10:20 PM   #3
Dave Haven
Senior Member
 
Join Date: February 1, 2000
Location: near Flagstaff, AZ
Posts: 790
Some of the early ones used a .223" diameter bullet. Later ones use a .224" diameter bullet. If in doubt, slug your barrel and measure the groove diameter. (or have your gunsmith do it for you)
Dave Haven is offline  
Old October 18, 2006, 01:36 AM   #4
rnovi
Senior Member
 
Join Date: July 10, 2005
Location: So. Cal.
Posts: 401
Go to Midwayusa.com and look for "Loadbooks USA". Buy the one marked for .22 Hornet.

Loadbooks basically compiles ALL commercial load data for one caliber into one resource for quick and easy reference all for around $8.
__________________
Robert N.

"Remember, Eagles may soar but Weasels don't get sucked into jet engines!"
rnovi is offline  
Old October 18, 2006, 02:21 AM   #5
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 3,446
Start with buying a manual. The Hornet usually uses a .224" bullet, but a .223" bullet will do.
T. O'Heir is offline  
Old October 18, 2006, 03:47 PM   #6
44 AMP
Staff
 
Join Date: March 11, 2006
Location: Upper US
Posts: 11,726
.22 Hornet

If your .22 Hornet rifle was made in the last 40 years it uses .224 in bullets, the dame as all the other modern .22 centerfires.

Hornets don't do well with bullets over 55gr, and are usually shot with 40 or 45gr bullets. The case is very small, and the brass is very thin in the neck. You have to be very careful loading the Hornet, when seating the bullet. It is very easy to mangle the case.

Only the very fastest rifle powder is suitable, the majority of loads are pistol powders. The Hornet is usually the first cartridge in the reloading books, being the smallest of standard commercial rifle ammo. Newest books may put the .17s ahead, but even the centerfire 17s have bigger case capacities.

It is a great round, just don't expect it to be something it isn't. With handloading, you can make ammo from about .22lr levels up to quite a ways beyond .22Mag. It is intended for small game and pests 150yds and under.

Bulklets in the 40-45 grane range are intended for the Hornet, and will perform well. 50+gr bullets are intended for the faster .22s, and while they may be accurate, they don't expand as well at the slower speed of the Hornet.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better.
44 AMP is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:48 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07638 seconds with 7 queries