The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old October 7, 2000, 11:15 AM   #1
sox
Senior Member
 
Join Date: February 19, 1999
Location: Atlanta Georgia
Posts: 591
Hey guys, very new to reloading scene. Any recommendations on 100 grain or less loads for the .38 these would be for my titanium smith. Thanks, Dave.
sox is offline  
Old October 8, 2000, 07:54 AM   #2
Cougar
Senior Member
 
Join Date: February 18, 2000
Location: N.E. Ohio
Posts: 637
Lightest common bullet weight for .38Spl is 110 gr.
My fav standard 110gr load for my Taurus 3" snubbie is a JHP over 6.4 grs of Unique. I don't have a chronograph yet, so I don't know the velocity in my shorter barrel, but it lists as 1100fps in a 6".
If I step up to a +P loading, I run a 125gr JHP over 5.4 grs of Universal Clays. Listed at 1072fps from a 4" barrel. This makes a nice, clean, accurate, 'plinking' load for my Dan Wesson 8" .357, and is quite managable in the all-stainless 3" snub!

The above loads are pretty stout for .38Spl and your lightweight gun will no doubt kick quite a bit more, but I would imagine that you really don't want to subject yourself to sustained practice with that gun anyway... I would imagine that your gun is meant to be carried much and used very little.

Then again, you may want to use a light-to-medium 140 grain wadcutter round. Very easy on the hands. a 140 gr lead wadcutter backed by 4.0 grs of Unique will net ~800fps, or even easier on the hands yet would be a 148gr wadcutter over 3.1grs of Unique for ~700fps. (Velocities listed for 4" barrel)

For practice I'd use mostly the wadcutter loads, and save the 'heavy' loads for carry use. Yeah, yeah, I know you should practice with your carry loads, but not all of your practice has to be punishment!

Your results may vary.
Cougar is offline  
Old October 8, 2000, 09:43 AM   #3
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,139
Jacketed bullets ONLY, and a very heavy crimp (recommend Redding Profile Crimp die).

------------------
"All my ammo is factory ammo"

WESHOOT2 is offline  
Old October 9, 2000, 01:51 PM   #4
taco
Senior Member
 
Join Date: April 28, 2000
Location: USA
Posts: 936
Some years ago I loaded some 95gr JHP (I don't remember the brand) with Win231. I shot these in my 5" model 10 and got 1,080 fps but the accuracy was pretty bad (5-6" at 25 yds) or 870 fps from my model 38 Bodyguard but the accuracy was more of a pattern. Also, few rounds from model 38 keyholed. Forget 95gr and move upto 125gr.
taco is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:56 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07029 seconds with 9 queries