The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old August 15, 2000, 09:07 PM   #1
David Roberson
Senior Member
 
Join Date: August 28, 1999
Location: Iron Station, NC
Posts: 582
As of this past weekend I'm a .32 Magnum owner. I've ordered a bunch of brass from Starline, but am having a harder time finding a good source of bullets, cast and jacketed. Who has the best supply and prices? Any suggestions welcome.
David Roberson is offline  
Old August 15, 2000, 09:50 PM   #2
Clark
Senior Member
 
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 2,827
http://www.carrollbullets.com/web.htm
They are practically giving away the brass.

The 32 mag is the most pressure under rated cartrige I can think of.

To load a 32 mag till the brass sticks when ejecting, is to load to 2 or 3 times book pressures.

If some one handed me 4 guns: a 44 mag, 357 mag, 41 mag, and a 32 mag and asked me to calculate the max pressure each gun could take, the 32 mag would be on top. That's not what SAAMI says
Clark is offline  
Old August 15, 2000, 09:59 PM   #3
David Roberson
Senior Member
 
Join Date: August 28, 1999
Location: Iron Station, NC
Posts: 582
Clark, I do indeed see the fine prices on .32 Mag brass, but can't find that they have the bullets anywhere.
David Roberson is offline  
Old August 16, 2000, 01:46 PM   #4
Paul B.
Senior Member
 
Join Date: March 28, 1999
Location: Tucson, AZ
Posts: 2,598
Clark. You might be right, if you are using a strong revolver like the Ruger. Remember though, the first handguns for the .32 H&R Mag. were made by H&R. I don't believe they are quite as robust as say the Ruger. Just a random thought on the subject.
Paul B.
Paul B. is online now  
Old August 16, 2000, 08:27 PM   #5
trlmech
Member
 
Join Date: June 3, 2000
Location: Virginia
Posts: 85
I'm just finishing up a box of 100grn swc from www.bull-x.com. Consistant size and weight, I plan on ordering more.
trlmech is offline  
Old August 16, 2000, 10:21 PM   #6
JimWolford
Member
 
Join Date: June 20, 2000
Posts: 63
David:

I also enjoy loading for a 32 Mag ( Ruger Single Six ) and have found the best bullets are from Hornady, I get mine thru Midway.

I have just started working up a load for the 60 grain Hornady HP slug, I suppose it was intended for loading 32 Auto, but the diameter is right for my Ruger.

I am getting velocities close to 1500 fps, and no flattened primers yet <s>

For lead bullets, Hornady 90 gr SWC are also available from Midway.

As I have been into casting bullets for about 50 years, I have a pile of bullet moulds, I have been having good luck with 32-20 bullets using hard lead and gas checks.

I have been able to duplicate 32-20 revolver preformance with the 32 Mag case quite easily.

Jim

------------------
Lay up some blackpowder and flints
The rest we can build, if need be
JimWolford is offline  
Old August 17, 2000, 12:38 AM   #7
bk40
Senior Member
 
Join Date: January 12, 1999
Location: Mississippi
Posts: 1,004
I cannot remember who recommended this to me, but, I have used Speer's 100gr RN-SP "plinker" (.308" designed for the .30 M1...) in a 30+ yr old SW .32 S&W Long revolver, with good accuracy!
- NOT RECOMMENDED THIS!-

best lead bullet used has been Speer's 98gr HB-WC also in the 32 Long.
bk40 is offline  
Old August 18, 2000, 08:05 AM   #8
zeke
Senior Member
 
Join Date: November 17, 1999
Location: NW Wi
Posts: 355
Speer's 100 gn hp's have provided the best accuracy (so far) with jacketed bullets tried in Ruger sp-101. They are commonly available from Midway, Midsouth, Natchez, Graph and sons.
zeke is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:39 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07075 seconds with 7 queries