The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Reply
 
Thread Tools
Old July 27, 2006, 05:01 PM   #1
Doug.38PR
Junior member
 
Join Date: January 18, 2005
Posts: 3,298
Which is cheaper buying all parts and doing it yourself or buying gun? (BAR)

The BAR being so expensive, even in semi auto replica, these days I was wondering if it would be cheaper to just buy all the parts and the schematics and put it together yourself. Ohio ordinance still makes the gun, which means parts are manufactured. I've seen full parts ads in catalogues for assembling replica machine guns and rifles.

The more I read about it, the more I like the BAR (or more specifically the .30-06 round it carries) over the AR-15 and the M1A. The .223 caliber is just too small. Feel like I'm shooting a .22. Want something that would create a larger wound cavity and have more penetration. The .308 is just a downgraded version of the .30-06 caliber. No. The BAR was a high capacity battle rifle that fires a round that has extra punch behind it. And it has more of a historical story to tell. So the new ones can't be "fully auto." Well as I understand it, the original ones really weren't "fully auto" in buy only fired automatic bursts of 3 or 4 rounds at a time. For this, all you legally need is a hellfire and you can still fire in bursts.
The .30-06 is a vicious round, but the weight of the BAR should soak up most of the recoil and even in practice could be used with lighter bullets or even frangible rounds (a round that was light even in my plastic stock Rem 700)
Doug.38PR is offline  
Old July 27, 2006, 05:50 PM   #2
onemsumba
Senior Member
 
Join Date: February 17, 2006
Location: Back In Oregon now!
Posts: 314
Generally

Building stuff from scratch is a lot more of a headace and a lot more expensive then just buying it right the first time.

dont' know about doing it for the BAR though... but do you want to spend 1000-1500 in parts just to figure out it was too big a project.

My recomendation Buy an M1 from the CMP.
__________________
No Wife
onemsumba is offline  
Old July 27, 2006, 08:01 PM   #3
hksigwalther
Senior Member
 
Join Date: November 18, 1998
Location: NE OH, USA
Posts: 3,198
Persoanlly, I would prefer someone who knows how to build a BAR (Ohio Ord) over someone who doesn't (me) and would be willing to pay the higher price.
__________________
- Ron V.
hksigwalther is offline  
Old July 27, 2006, 08:04 PM   #4
Doug.38PR
Junior member
 
Join Date: January 18, 2005
Posts: 3,298
Think of it as a challenge. If you did put it together yourself, you'd take all the more pride in it
Doug.38PR is offline  
Old July 27, 2006, 08:15 PM   #5
USNairman
Senior Member
 
Join Date: March 2, 2006
Posts: 421
While I don't know anything about the BAR, I did purchase the parts and put both of my AR15's together. It was much cheaper and fun to do.
__________________
"As the light grows dimmer and the trail begins to fade, my sweetest dreams are those of yesteryear, at deer camp." Author, Jim Slinsky
USNairman is offline  
Old July 27, 2006, 08:22 PM   #6
Don H
Senior Member
 
Join Date: May 8, 2000
Location: SLC,Utah
Posts: 2,705
Price the parts, price a complete rifle, and you'll have your answer. Don't forget the cost of any specialized tools you'll need.
Don H is offline  
Old July 28, 2006, 12:35 PM   #7
Doug.38PR
Junior member
 
Join Date: January 18, 2005
Posts: 3,298
Does anyone have any idea where you can get parts (NOTE: I would need to be careful to be sure and order SLR 1918A3, the semi auto version otherwise I could be looking at 10 years in prison violating divine federal law ) I looked at Numreich/E-gunparts and looked around many articles using Google but saw no indication where I could get parts.
Doug.38PR is offline  
Old July 28, 2006, 12:49 PM   #8
kozak6
Senior Member
 
Join Date: June 16, 2005
Location: AZ
Posts: 2,323
With the BAR, it might be better to look around and see if you can just buy a completed semiauto, if there is such thing.

I'm not familiar with the SLR 1918A3, but the BATFE still has some requirements for semiautos. They can't fire from an open bolt, and you have to worry about the ability to swap full auto parts in and such.

Unless you are a machinist, this project may not be worth pursuing.
kozak6 is offline  
Old July 28, 2006, 04:26 PM   #9
El Barto
Member
 
Join Date: February 16, 2006
Location: Maywood, CA
Posts: 64
Doug,

I sooooo know what you mean. I love the knock-knock-knock sound of the BAR and I would love to own one. I do know that at one time there "were" part kits with cut receivers, but every place I have contacted has said no more. I really hate to break it to you, but unless you want to send the 10K for a real one, Ohio Ordnance is the way to go. That is unless you find some little old lady selling off her dead husbands collection.

If I do find a kit or a lead into one, I will let you know.
El Barto is offline  
Old July 28, 2006, 11:49 PM   #10
maas
Senior Member
 
Join Date: November 13, 2005
Location: The state of Jefferson
Posts: 897
my thoughts are if it aint fully auto it aint a BAR buy a garand
__________________
I don't try to offend....some times i get lucky!

There's always one thing that makes Republicans look good on election day...........Democrats!
maas is offline  
Old July 29, 2006, 12:00 PM   #11
hksigwalther
Senior Member
 
Join Date: November 18, 1998
Location: NE OH, USA
Posts: 3,198
Quote:
Think of it as a challenge. If you did put it together yourself, you'd take all the more pride in it
I'm all for knowing your weapons inside and out and working on them yourself. I do that for my 10/22s. But, as noted above, the parts kits will most likely be for full auto and getting the proper fitment into a semi receiver (if you can get one) will probably involve much more work than simply assembling parts. If you've got a good set of machining tools and equipment and a good eye on what needs to be shaved/re-shaped by so many mils at such and such angles, good luck to you. As for me, I don't have the tools or the knowledge and am not willing to pay large dollars for additional parts I screw up. (The 10/22s aren't quite as expensive .)

(I'm saving up for an OH Ord 1918A3 myself . They are only about 40 minutes away from me. It's #2 on my all time "Get This" list and I don't think I'll ever get #1, an HK PSG1.)
__________________
- Ron V.
hksigwalther is offline  
Old July 30, 2006, 12:22 AM   #12
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
From Doug.38PR

"The .223 caliber is just too small. Feel like I'm shooting a .22."

LOL sorry, this just tickled me. .223 is .22 caliber. Just like .222 and .22-250 and so on. You probably meant .22 rimfire but it made me laugh.
mrawesome22 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08969 seconds with 7 queries