The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 25, 2000, 10:01 PM   #1
pack_rat
Senior Member
 
Join Date: March 13, 2000
Location: AL50
Posts: 148
This is not the impact puller.
There is a picture of it in the Midsouth catalog, and it appears to work on a press.
Can anyone give a quick rundown on how this critter works?
pack_rat is offline  
Old June 25, 2000, 11:44 PM   #2
Jeff, CA
Guest
 
Posts: n/a
It does work in a press. You screw the main body in like a die, then you put in a collet of the correct diameter (close to bullet diameter). You run the cartridge up into the puller, tighten the collet around the bullet, and pull the case down. Done right, there's no impact, and no powder spillage. It won't work on wadcutters seated flush with the case mouth.
 
Old June 26, 2000, 08:22 AM   #3
James E
Junior member
 
Join Date: April 20, 2000
Posts: 371
Pack_rat:

Check out the new Hornady "Cam Lock Bullet Puller" its a die with a lever device on the top, has collet insert that seats a caliber type inside die. Lever gently closes collet bullet is easily extracted no fuss or muss.
I own the RCBS you are talking about and the Hornady is much superior.

Jim
James E is offline  
Old June 26, 2000, 07:24 PM   #4
pack_rat
Senior Member
 
Join Date: March 13, 2000
Location: AL50
Posts: 148
Thanks a bunch.
I do like Hornady products, so the Cam Lock would be gravy on the biscuit.
Gracias.
pack_rat is offline  
Old June 27, 2000, 11:15 PM   #5
Art Eatman
Staff Lead
 
Join Date: November 13, 1998
Location: Terlingua, TX, USA
Posts: 22,540
In a pinch, if you don't have a puller, a pair of standard pliers works quite well. Just run the cartridge up with no die in the press. Grab the bullet with the pliers and pull the cartridge down. The entry of the nose of the pliers into the press tightens the grip. The bullets will still be usable for casual hunting or plinking.

I've only done this with jacketed rifle bullets.

FWIW, Art

[This message has been edited by Art Eatman (edited June 28, 2000).]
Art Eatman is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:48 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06192 seconds with 7 queries