The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old May 5, 2000, 08:04 PM   #1
Fred S
Senior Member
 
Join Date: July 2, 1999
Location: New Baltimore, MI
Posts: 569
Does anyone know what the NATO load specs are for the 7.62 round?

Powder, grains, length etc?

Thanks
Fred S is offline  
Old May 5, 2000, 11:24 PM   #2
SKR
Member
 
Join Date: April 8, 2000
Posts: 68
Which version?
SKR is offline  
Old May 6, 2000, 05:10 AM   #3
animal
Senior Member
 
Join Date: April 28, 2000
Location: Mississippi
Posts: 705
I believe they are.. 7.62mm NATO :

The outer dimensions should meet same specs. as commercial .308 Win. ammunition.

M 59 (Ball)plain tip
Bullet : 150 gr.
Powder : WC 846 - 46grs. [OR] IMR 4475 - 41 grs.

M 60 (HIGH PRESSURE TEST)stannic stained case
Bullet : 173gr.
Powder : IMR4475 - 41grs.
Used only to proof test weapons. This thing develops something like 70,000 psi! Don't even think about it....

M 61 (AP)black tip
Bullet : 150 gr.
Powder : WC 846 - 46grs. [OR] IMR 4475 - 41grs.

M 62 (Tracer)orange tip
Bullet : 142gr.
Powder : WC 846 - 46 grs.
real purdy at nite

M 62 (Tracer- overhead fire)red tip
Bullet : 146gr.
Powder : WC 846 - 46grs.

M 63 (Dummy)6 long dents around case
Bullet : 68gr.
Powder : Nuthin

M 64 (Grenade firing Blank)rose crimp
Bullet : It'd screw up yer whole day if it had one.
Powder : WC 830-45grs.[OR]HPC4-37grs[OR]IMR8097-40grs.

M 80 (Ball)plain tip
Bullet : 147gr.
Powder :WC846-46grs.[OR]IMR8138-41.5grs.[OR]IMR4475-41grs.

M 82 (Blank)crimped mouth
Bullet : None
Powder : SR4759-17.5grs.[OR]HPC-2-14.5grs.[OR]WC818-14.5grs.

M 118 (Match)"Match" or"NM" on case head
Bullet : 173gr.
Powder : IMR 4895-42grs,[OR]WC846-44grs.

M 852 (Match)sez "Match" or "NM" on case too but has a itty bitty hole in end of bullet
Bullet : 168gr. HPBT
Powder : IMR 4895 - 42grs.
I hear this is the favorite of the fed. boys at Waco.

M 160 (Frangible Ball)green tip, white annulus
Bullet : 105gr.
Powder : SR8074-10.5grs.[OR]HPC 8-10.5grs.[OR]WC140-11.4grs.

M 172 (Dummy - loaded)no primer or vent hole
Bullet : 147gr.
Powder : Nuttin but a bunch o trash

M198 (Ball, Duplex) green tip
Bullet : 82gr. (front) ; 83gr.(rear)
Powder : WC846? - 45.5grs
Yep, two bullets in one case

I'm not sure of any of these specs. - hope it helps. List comes from compiling different sources. Don't Load up any of these using above info. These Loads are for Discussion Purposes ONLY!!!
Whew, I hope I've covered my butt enough. If ya blows up yer gun it ain't mah fault... so there.
animal is offline  
Old May 7, 2000, 06:07 PM   #4
mbott
Senior Member
 
Join Date: October 9, 1999
Location: Central, OH
Posts: 622
Fred,

Click on http://www.ar15.com/books/ and download TM42-0001-27.pdf. Should provide a good starting point. :-)
mbott is offline  
Old May 8, 2000, 05:54 PM   #5
AL@PA
Member
 
Join Date: March 22, 2000
Posts: 24
It's listed in the new Hornady load book.
AL@PA is offline  
Old May 9, 2000, 02:15 PM   #6
Banzai
Senior Member
 
Join Date: January 29, 2000
Posts: 275
I shoot National Match Rifle (Military service) M14. The M852 stuff is the SH*T when it comes to accuracy from an M14 or M1. 200, 300, 500 yards, dosen't matter, always spot on with the windage charts! Use Sierra bullets to duplicate.

Tom


------------------
A "Miss" is the ultimate overpenetration!
You can never be too rich, too skinny, or too well armed!

[This message has been edited by Banzai (edited May 09, 2000).]
Banzai is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:07 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07317 seconds with 9 queries