The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 15, 2000, 06:55 PM   #1
BadShot
Member
 
Join Date: March 12, 2000
Location: West Des Moines, Iowa
Posts: 22
My local gun dealer has been pushing me to try some National Bullet 'Copperized' copper coated lead bullets($30.00 for 500). I guess the idea is to cut down on the lead fouling. I was thinking about trying them in 158gr SWC and using 3.5gr of W231 for target practice. Anybody have any experience with these? Any other suggestions?


Thanks
BadShot is offline  
Old April 16, 2000, 12:38 AM   #2
kframe19
Member
 
Join Date: April 9, 2000
Posts: 61
Bad,

I've used maybe 5,000 NBC bullets over the past 10-12 years or so. Generally I've been happy with them. They're not the best looking bullets around (normally a little wrinkly and some have uneven sprue marks and whiskers), but they work well enough for me.

I've been loading their 230-gr. LRN lately for .45 Auto and .45 Auto Rim. Work just fine.

Somewhere I've got 500 of their .32 cal. bullets that I load in .32 Long. --Mike
kframe19 is offline  
Old April 16, 2000, 12:48 AM   #3
Mal H
Staff
 
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 14,482
National Bullet's bullets fail into the "ok" category - not real good and not bad. They're fine for your intended purpose of target practice. I find quite a few bullets with voids and missing lube out of each box. They don't go through any swaging process like Oregon Trail or Bull-X for example. Even so they usually hit the paper where pretty much where I aim them. I'm always amazed at what actually doesn't matter when it comes to an accurate bullet. The copper on the Nationals is very thin. It's more like a copper paint than a thin copper jacket like you get with Rainier's.
Mal H is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:25 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07760 seconds with 9 queries