The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 23, 2000, 08:18 PM   #1
Banzai
Senior Member
 
Join Date: January 29, 2000
Posts: 275
What are your favorite 40 Smith loads? I'm looking for economical loads (bullets/powder) to do some high volume loading for my club. We're looking at lead bullets (155,165,and 180gn), and maybe Titegroup if they can give us a good loading for lead bullets.
Any suggestion? Thanks.

Tom



------------------
A "Miss" is the ultimate overpenetration!
You can never be too rich, too skinny, or too well armed!
Banzai is offline  
Old March 23, 2000, 09:12 PM   #2
Stephen A. Camp
Staff In Memoriam
 
Join Date: April 16, 1999
Posts: 2,570
Hello. I've had very good results with a 180 gr cast flat point bullet over 5.8 gr. Unique with WW or Fed small pistol primers. I generally use WW or Federal cases. Best.
Stephen A. Camp is offline  
Old March 23, 2000, 09:27 PM   #3
char923
Senior Member
 
Join Date: February 18, 2000
Location: Anchorage AK
Posts: 237
I use 7.2gr of Accurate No.5 with 180gr TC lead bullet. It chrony at a average of 982 FPS. Check my site for more loads.
char923 is offline  
Old March 23, 2000, 11:14 PM   #4
Wayne Dobbs
Member
 
Join Date: March 14, 2000
Posts: 24
Banzai,

Here's a few of my favorite .40 SW loads:

1. 180 Ranier FP
4.5 WST
WW Primer
1.130 OAL

2. 180 Ranier FP
4.5 WW231
WW Primer
1.130 OAL

3. 170 Cast SWC
5.0 WW231
WW Primer
1.125 OAL

4. 155 Ranier FP
5.0 WST
WW Primer
1.125 OAL

Suggest you NOT use load #3 in Glock pistols. Also, I use once fired brass to load these and generally DON'T try to load them more than two or three times (just a lot of caution with this caliber on my part).

All of the above have shot very well in the guns I've used them in...haven't tried Titegroup yet, but intend to soon.

Wayne Dobbs
Wayne Dobbs is offline  
Old March 24, 2000, 05:48 PM   #5
AF Shooter
Member
 
Join Date: March 24, 2000
Posts: 95
My favorite load for IDPA and IPSC minor is:

140 gr TC lead bullet
8 gr of HS-6
CCI 500 primer
OAL 1.120

It shoots great and burns clean. Velocity runs right around 1095 fps.



------------------
Tom Whitman
SSgt, USAF
AF Shooter is offline  
Old March 24, 2000, 11:18 PM   #6
SVSUPER
Member
 
Join Date: February 3, 2000
Posts: 30
IDPA Load
155gr precision bullet
4.5 WST
1.135 OAL
Winchester SPP

IPSC LOAD
220 Gr precision bullet
3.5 N320
1.165 OAL
* This load is not for guns with unsupported chambers. If you choose to use this load use only brass that is in good condition. Avoid any brass with GFL headstamps*
SVSUPER is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06125 seconds with 7 queries