The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 23, 2000, 05:20 PM   #1
Monkeyleg
Senior Member
 
Join Date: January 25, 2000
Posts: 4,625
A friend gave me a hundred of his .38 special loads to try out. On the sight-in, I got a 12 shot group measuring about 1 1/4" at 50 feet off sandbags. The load is 3.5 grs W 231 over a 148 gr lead wadcutter. I took the brass and
bullets he sold me and loaded them up. But the groups I got were much larger than with his reloads. Any ideas on where to start looking for variables? He said to crimp _very_ lightly, which I did. I did not ask what primers he was using; I used Winchester.

Any ideas would be appreciated.

Dick
Monkeyleg is offline  
Old March 23, 2000, 08:25 PM   #2
Big Bunny
Senior Member
 
Join Date: August 9, 1999
Location: New South Wales - Australia
Posts: 605
Monkey those groups sound too good, some psyche is probable, as you were using them first time ? Have faith in your own abilities my friend...and check sights tightness !!

I also suggest you check the diameter and type of projectiles you are using and slug your barrel diameter to be compatible [rather than the cases, but check them for splits.] A chronograph for a 38Spl should be 650-900FPS - but your load seems OK by me and an up to 4" group not un-usual at 50m especially for the ballistically inefficient '44 Gallon barrel' W/Cutter!


Try again after digesting above ...and good luck, enjoy your research !

------------------
***Big Bunny***
Big Bunny is offline  
Old March 24, 2000, 05:19 PM   #3
Monkeyleg
Senior Member
 
Join Date: January 25, 2000
Posts: 4,625
Thanks, Big Bunny. I went back just now and measured the target again. It was 1 1/4" center to center at the widest spread of the group. The group actually was just three large holes.

The bullets I used yesterday are the same ones that my friend uses; I bought them from him.

Maybe it was the temperature, maybe it was me. That's the fun of handloading, or the frustration, depending upon how the load shoots.

Dick
Monkeyleg is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07265 seconds with 9 queries