The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 8, 2000, 07:03 PM   #1
bergie
Senior Member
 
Join Date: April 19, 1999
Posts: 567
Well, like I said, I'm finally putting all that empty brass I've accumulated to use. I've been reading everything here for quite some time, and have a pretty good understanding of the process. I have reloaded shotshells for years, but never metallic. My brother reloads for his rifle, and I have discussed it with him. I spent quite a bit of time talking with a guy that I met recently, got a hands-on lesson in reloading, and had a good discussion on what equipment is necessary, and/or desirable. I bought a couple of books, and studied them. After comparing prices from several sources, wound up buying the "el cheapo special" Lee anniversary kit. I also bought a set of carbide dies for 9mm, and the deluxe set for my .270.
I have only reloaded a couple of boxes of 9mm so far, using a 115g hp over some Unique which I had on hand from my shotshell loading. Everything went very smoothly.
Last Sunday I took my two pistols (TA90 and FP9) out to my buddies farm where we have a range set up, and made some more empties. No, I didn't load up both pistols and start blazing away, I cautiously fired single rounds until I was sure that I did everything right and this ammo would go bang and my pistols wouldn't go kaboom. It was a nice light load that functioned flawlessly, and shot at least as well as factory stuff.

Now I have a couple thousand once fired and 100 twice-fired empty 9mm cases to fill back up. Then I get to start working on the ultimate load for my Savage .270. My next die set will probably be .45acp, but might be for my .357. I also will need a set for my .30-06. I will probably need several different types of powder as well as an assortment of bullet weights and styles. Then I guess I will not only have to spring for dies but brass for my .303, 7.62 x39, .223 as I have mostly just used berdan-primed surplus stuff in them. More bullets and powders. Heck, if I get that far into it, I am going to need a better press, probably a progressive for most of my loads, but a better single stage for my hunting ammo, so make that 2 presses. Then I suppose I will need a tumbler, and power everything that I am currently doing by hand. Hey I thought all you guys said that reloading saves money, this is getting expensive and I've just started.

Bergie
bergie is offline  
Old March 8, 2000, 08:23 PM   #2
HankL
Senior Member
 
Join Date: March 11, 1999
Location: The Sunny South
Posts: 2,174
Bergie, You are getting the idea! In my situation it got to the point that I designed and built my home around my reloading "etc" area. I am not into match shooting anymore and only load a few thousand rounds a year.
I have more stuff than I need now but I really enjoy being able to produce a great round for almost everthing in my collection.
Start off slowly and have fun.
Best to you!
Hank
HankL is offline  
Old March 9, 2000, 02:58 PM   #3
wildcat
Member
 
Join Date: December 20, 1999
Location: Northeast Kingdom of Vermont
Posts: 88
Take your elcheapo lee kit and set it up as a portable unit to take to the range with you.It will save you many trips from home to the range when working up loads.It will also keep you from ending up with a whole box of to hot load that you will have to pull.
wildcat is offline  
Old March 9, 2000, 06:21 PM   #4
TheOtherMikey
Senior Member
 
Join Date: October 16, 1999
Location: Surprise, Arizona, USA
Posts: 171
Lee!! He surrendered to Mike Dillon a long time ago. Get yourself a good press like a Dillon 550B.

------------------
Retired, Broke, and In Need of Brass, Powder, and Shot. Will Work To Shoot!
TheOtherMikey is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:15 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06593 seconds with 7 queries