The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 2, 2000, 12:10 PM   #1
Oleg Volk
Staff Alumnus
 
Join Date: December 6, 1999
Location: Nashville, TN
Posts: 7,022
I am trying to decide if I can manage a set-up for reloading Nagant cartridge on a Dillon rig (model #?)

Basically need to know what to get (dies, etc.), where to find/make brass, primers, bullets, what charges to use (will re-verify those with reloading manuals), any other basic hints. Also curious as to how much the setup and components cost. Hope to load them for no more than 25 cents per shell (assuming I make a thousand for starters), less if possible.

------------------
Oleg "cornered rat" Volk (JPFO,NRA)

http://dd-b.net/RKBA
Oleg Volk is offline  
Old March 2, 2000, 01:18 PM   #2
MITHRANDIR
Member
 
Join Date: January 14, 2000
Posts: 23
You might try asking at = http://www.paradise-web.com/plus/plu...sshack&all=yes

these guys are x54r all the way

MITHRANDIR is offline  
Old March 2, 2000, 05:51 PM   #3
Alan B
Senior Member
 
Join Date: August 26, 1999
Posts: 335
Dillion sells the shell plate.

Lee has the dies

Starline Brass is supposed to start production of 54r brass sometime this year.

Failing that you can buy 7.62X54r 180 gr soft points from Sellier and Bellot for $8.00 a box. While not cheap and it is loaded ammo, it is boxer primed and it is cheaper than empty Norma or Laupa brass.

as for bullets .308 will work, but depending on the gun either .308 or .310-.312
My Romack III sluged out the same size as my M-1 Garand.

The Silver tiped stuff is close to .308 in size, the SB soft nosed stuff is around .312 and the 54r Ball from the 440 rnd cans is .310 so who knows.

I havent found the definitive answer yet

[This message has been edited by Alan B (edited March 02, 2000).]
Alan B is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:14 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05951 seconds with 7 queries