Advanced Master Reloading Kit

Enigma · February 20, 2000, 01:57 PM

Has anyone seen the Advanced Master Reloading kit at Cabelas? It is made by RCBS. It costs a little over five hundred dollars. I would appreciate your views on this system! www.cabelas.com Thanks!!

capbuster · February 20, 2000, 07:54 PM

alabama dan,has recently purchased this kit and he is most pleased with it. i noticed he has a post on once fired brass. hopefully he will respond to your question. i dont have a rcbs press but have been enjoying thier dies for years. take care.

------------------

cliff

Ala Dan · February 20, 2000, 10:49 PM

Greetings Fellow Shooter's, In response to the RCBS Master Reloading Kit series; I did
purchase the regular Master Reloading Kit
as made by RCBS, in October of 99. Thanks
to my friend Capbuster; we got everything
set-up, but I've only gotten to use it on
one occassion. Hopefully, that is fixing
to change. The equipment is first class;
however I am not quite use to RCBS die's;
as I am acustomed to Lyman die's from past
experience's. I hope to crank out some 9m/m,
38.Spl, and .45ACP rounds before too awful
long. I will write it up some more, when
I get the result's. Looks like the Advanced
Kit comes with the electronic powder measure,
and ditto for the scales. Hey Capbuster,
you know that RCBS is a division of Blount
Inc. Shooting Sport's Division don't you?
That's owned by our old friend Mr. Winton
Blount of Montgomery, AL!!!

Best Wishes To All,
Ala Dan, N.R.A. Life Member

February 20, 2000, 01:57 PM	#1
Enigma Member Join Date: December 1, 1999 Location: Santa Rosa, California Posts: 46	Has anyone seen the Advanced Master Reloading kit at Cabelas? It is made by RCBS. It costs a little over five hundred dollars. I would appreciate your views on this system! www.cabelas.com Thanks!!

February 20, 2000, 07:54 PM	#2
capbuster Senior Member Join Date: August 8, 1999 Location: Bessemer,Alabama Posts: 298	alabama dan,has recently purchased this kit and he is most pleased with it. i noticed he has a post on once fired brass. hopefully he will respond to your question. i dont have a rcbs press but have been enjoying thier dies for years. take care. ------------------ cliff

February 20, 2000, 10:49 PM	#3
Ala Dan Member in memoriam Join Date: August 14, 1999 Location: In The HOT, Humid, and Mu Posts: 6,117	Greetings Fellow Shooter's, In response to the RCBS Master Reloading Kit series; I did purchase the regular Master Reloading Kit as made by RCBS, in October of 99. Thanks to my friend Capbuster; we got everything set-up, but I've only gotten to use it on one occassion. Hopefully, that is fixing to change. The equipment is first class; however I am not quite use to RCBS die's; as I am acustomed to Lyman die's from past experience's. I hope to crank out some 9m/m, 38.Spl, and .45ACP rounds before too awful long. I will write it up some more, when I get the result's. Looks like the Advanced Kit comes with the electronic powder measure, and ditto for the scales. Hey Capbuster, you know that RCBS is a division of Blount Inc. Shooting Sport's Division don't you? That's owned by our old friend Mr. Winton Blount of Montgomery, AL!!! Best Wishes To All, Ala Dan, N.R.A. Life Member