The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old May 20, 2006, 11:46 AM   #1
keebo52
Senior Member
 
Join Date: January 30, 2005
Posts: 244
Source for Berdan Primers

Anyone have a source for berdan primers LR (.217)??? They are available from PMC but they require a minimum order of 5000 and I don't need that many.
keebo52 is offline  
Old May 22, 2006, 03:31 PM   #2
lucabrigatti
Junior Member
 
Join Date: July 19, 2005
Posts: 8
rws

I don'tknow who is Rws distributor in Usa, here is a list of Rws Berdan primers
Model Diameter Wall
4506 4,5 mm 2,2 mm Small Pistol
4520 4,5 mm 2 mm Small Rifle
4521 4,5 mm 2,2 mm P Parabellum
5005 5 mm 2,2 mm Medium Berdan
5608 5,5 mm 2,8 mm Standard Nato
5620 5,5 mm 2,5 mm more common
6000 6,35 mm 2,8 mm Large Berdan Rifle
6504 6,45 mm 2,2 mm Extra Large Berdan
6507 6,45 mm 3,4 mm Oversize Berdan
lucabrigatti is offline  
Old June 7, 2006, 08:33 PM   #3
skeet47
Member
 
Join Date: November 2, 2005
Posts: 50
berdan primers

The Old Western Scrounger stocks berdan primers.
skeet47 is offline  
Old June 9, 2006, 10:20 AM   #4
MrApathy
Senior Member
 
Join Date: December 21, 2004
Posts: 520
CCI manufactures Berdan primers look for whoever sells CCI primers
__________________
Divided and conquered, Gripped by fear
Wishful thinking that it can't happen here
It's well underways but nobody knows
A repeat of history, That's how it goes
MrApathy is offline  
Old January 23, 2007, 11:56 PM   #5
Williamr
Member
 
Join Date: January 23, 2007
Posts: 18
I have Been asking about a good outlet for Berdan Primers for a few months. CCI makes Berdan Primers for their Blazer ammo, at least that what I was told. The Old Western Scrounger said they were not going to carry them any more. I never got a reply from PMC. They may feel it is nothing to react to. So,I contacted the Technical Support at Midway USA. I asked them to consider carrying Berdan Primers for those of us who know how, or want to learn how to reload with them. I told Midway I would buy them if I could get Berdan Primers to reload that fantastic Swiss 7.5x55 brass,and for the steel cased 7.62x54R. My SVT-40 can only fire steel cased ammunition. Brass case ammunition malfunctions in the SVT-40. So if enough reloaders contact Midway to carry Berdan Primers, they might do it. I am still waiting for a reply to this question. Thanks.

williamr
Williamr is offline  
Old January 24, 2007, 02:36 AM   #6
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 3,140
Loading with berdan primers is more trouble and expensive than it's worth. What are you trying to load?
CCI is not listing berdan primers on their site.
T. O'Heir is offline  
Old January 24, 2007, 11:01 PM   #7
Ken O
Senior Member
 
Join Date: November 2, 2005
Location: Half way between Grayling and Cadillac, Michigan
Posts: 353
I reload the GP11 for the K31 rifle, I get my Berdans from http://www.brassmanbrass.com/ They are not on his website, you have to call to order.
My method of depriming is to take a 5/16" bolt about 4" long and cut off the threaded part. Its a hair too thick to fit in a fired case, so put it in a drill motor and sand it down until it just fits.
A 1/2" socket 3/8"drive is just right to hold the case. So, just dip the case in a pan of water, set it in the socket, put in the bolt and give it a whack with a small hammer. The primer pops out into the socket drive area.
This takes longer to describe than to do, and only a few drops of water come out. Dump the rest of the water out of the case and set out to dry. I can deprime these almost as fast as I can the Boxers, but you still have to resize and let them dry.
Ken O is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07287 seconds with 7 queries