The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old November 18, 1999, 06:48 PM   #1
umstud
Member
 
Join Date: July 19, 1999
Posts: 31
I am getting into reloading for the first time. I have decided on the Dillon RL 550B progressive press. Can you experts tell me the absolute minimum stuff I have to purchase in addition to the press in order to get started and the best place to purchase these items. Also give info on "nice to have" items. I want to start as soon as possible.
umstud is offline  
Old November 18, 1999, 08:32 PM   #2
Trooper
Member
 
Join Date: July 23, 1999
Posts: 26
Get some loading manuals, Speer or Lyman's 47th. Dies for each caliber, a scale to weigh powder charges, caliper for guaging OAL, brass, primers, bullets. If also loading rifle, get a trimmer and chamfer tool for case trimming and deburring. I would also recommend a case guage. You'll also need a tumbler, media and additive for cleaning/polishing brass. You'll need a sturdy bench to mount your press on as well as some place safe to keep your powder, bullets and primers.

Where to purchase? Check out Midway, Natchez and other shooting supply stores. Local gun shops and gun shows can be good places also.

For what it's worth, my advice is to slow down. There's more to it than just buying components and equipment. That pretty blue press will be calling to you to crank out some ammo, but first I encourage you to do some heavy reading on reloading---powder, primers, brass cases, bullets, etc. You need to know what kind of powder to use, how much, with what style and weight bullet, using how much of that powder, seating the bullet how deep, crimping or not crimping? There's a whole lot more. Reloading is a great pleasure and can save you some money most of the time, but the main thing is to be safe and accurate in your assembly of each cartridge. Spend some time in your load manuals, search posts on this forum and others, better yet, find someone who already loads to mentor you if that's possible. I'll bet you can at your local gun range. Stay safe and welcome to the club!
Trooper is offline  
Old November 18, 1999, 08:36 PM   #3
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 13,903
Required:

Scale
Scale weight check set
Dial caliper
Load manual (more is better)
Safety glasses (warning: primers will explode)

"Nice"

everything else; tumbler, case gauges, loading blocks, Co-Ax press, etc., etc., etc.........

.......the list is virtually endless.......



------------------
"All my ammo is factory ammo"

WESHOOT2 is offline  
Old November 19, 1999, 08:46 AM   #4
Bianchi
Member
 
Join Date: November 2, 1999
Location: Randolph, MA USA
Posts: 38
UMSTUD,I know this may sound obvious, but make sure you get the conversion kits and Dies from Dillon with the press. Nothing is more frustrating than opening the box to your new 550 and not being able to get started right away.I started with a 550 also. The Lyman manual is good to study.
Lou
Bianchi is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:49 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06856 seconds with 7 queries